Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder

Zenty

Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder
$700.00

25% Discount. Apply Code 25percentOff at Checkout!

Part Number:
ZT-158
Condition:
New
1:
4K 60Hz 4:2:0 AV over IP Solution
2:
IP300 Series
3:
RS-232
4:
Matrix Routing
5:
Free USA Shipping
6:
International Shipping w/Wire Transfer
7:
Hassle-free Warranty
8:
5-Year Zenty Warranty
9:
Free Returns within 60 Days
10:
Lifetime Technical Support
11:
Save 5% with Wire Transfer or Check
Make a Fair Offer
Ask an Expert

This Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder is the ideal AV over IP solution for applications that require high-quality content distributed with minimal latency. The IP300 series utilizes JPEG 2000 technology to deliver 4K@60Hz 4:2:0 content and multichannel audio (DTS:X & Dolby Atmos) over a 1GbE Network with exceptionally low latency (1-2 frames). With the ability to perform matrix routing and video wall configurations up to 16x16, the Zenty IP300 series is the perfect solution for both commercial and residential applications.

Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder Features:

  • The most cost-efficient 4K 60Hz 4:2:0 AV over IP solution. Deliver 4K HDR content over a 1GbE network with minimal latency at an affordable price
  • Plug-and-play modular PoE devices make scaling to large deployments simple
  • IP300 Series combines value with features that include 16x16 video wall functionality, 4K/2K scaling, DTS:X and Dolby Atmos audio support and independent audio routing
  • Bi-directional RS-232 capability and CEC One-Touch Play/Standby
  • Free Z-Net iPad control app that enables access and control of entire system with live video previews of all sources and destinations

Why not buy this Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder from HDTV Supply today?

Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder Specification:

  • Audio
    • Bit Depth: 24 bits
    • Digital Audio sampling: 48KHz
    • Format
      • Dolby 5.1, Dolby True HD, Dolby Digital Plus
      • DTS 5.1, DTS HD, DTS True HD
      • LPCM 2.0, LPCM 2.1, LPCM 5.1, LPCM 7.1
    • Frequency Response: 20Hz to 20KHz, ±1 dB
    • Gain: Unbalanced output: 0 dB
    • SNR: > 85 dBFS at input (A-weighted)
    • Stereo Channel Separation: > 80 dB
    • THD+N: -78 dBFS typical at -5.2 dBV input
    • Input: 1 x 3.5mm jack
  • Video
    • Average Encoding Data Rate
      • 1080p @ 60Hz: about 150 Mbps
      • 4K @ 30Hz: about 250 Mbps
    • Chroma Sampling: 4:4:4, 4:2:0
    • Color Depth: 8 bits per color
    • End to End Latency: 1 - 2 FPS
    • Frame Rate: 24, 30, 50 or 60 FPS
    • Maximum Data Rate: 8.91 Gbps (2.97 Gbps per color)
    • Maximum Pixel Clock: 297 MHz
    • Resolution: Up to 4K @ 60Hz
    • Input: 1 x RJ45
    • Output: 1 x HDMI Type A
    • Specification: HDMI 1.4, HDCP 2.2, CEA-861F
  • Communications
    • Control & Management Method: The front panel link DIP switch, Windows PC configurator (Z-Net Console), Z-Net on iPad, IP controller (ZT-IP100C)
    • IR Connector: 1 x 3.5mm jack
    • IR Carrier Frequency: 36KHz - 58KHz
    • Serial Connector: 1 x 3-pin phoenix
    • Serial Pin Configuration: TX-GND-RX
    • Ethernet Port: LAN (POE): 10/100/1000 HDBaseT port, connect this port to a gigabit Ethernet switch for IP stream input, device control and device management.
    • Ethernet IP Address: 169.254.x.x
    • Ethernet DHCP: Off
    • Ethernet Auto IP: On
    • Ethernet Subnet Mask: 255.255.0.0
  • General
    • Enclosure Type: Metal
    • Operating Humidity: 10% RH - 90% RH (non-condensing)
    • Operating Temperature: 32°F - 113°F
    • Power Supply Output: DC 12V/1A
    • Power Consumption: 4W
    • Rack Mount: Yes
    • Regulatory Compliance: CE, FCC, RoHs

Why not buy this Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder from HDTV Supply today?

Zenty ZT-158 User Manual

Why not buy this Zenty ZT-158 IP300 4K@60Hz 4:2:0 AV Over IP System Decoder from HDTV Supply today?