This Zenty ZT-157 IP300 4K@60Hz 4:2:0 AV Over IP System Encoder is the ideal AV over IP solution for applications that require high-quality content distributed with minimal latency. The IP300 series utilizes JPEG 2000 technology to deliver 4K@60Hz 4:2:0 content and multichannel audio (DTS:X & Dolby Atmos) over a 1GbE Network with exceptionally low latency (1-2 frames). With the ability to perform matrix routing and video wall configurations up to 16x16, the Zenty IP300 series is the perfect solution for both commercial and residential applications.
Zenty ZT-157 IP300 4K@60Hz 4:2:0 AV Over IP System Encoder Features:
- The most cost-efficient 4K 60Hz 4:2:0 AV over IP solution. Deliver 4K HDR content over a 1GbE network with minimal latency at an affordable price
- Plug-and-play modular PoE devices make scaling to large deployments simple
- IP300 Series combines value with features that include 16x16 video wall functionality, 4K/2K scaling, DTS:X and Dolby Atmos audio support and independent audio routing
- Bi-directional RS-232 capability and CEC One-Touch Play/Standby
- Free Z-Net iPad control app that enables access and control of entire system with live video previews of all sources and destinations
Why not buy this Zenty ZT-157 IP300 4K@60Hz 4:2:0 AV Over IP System Encoder from HDTV Supply today?
Zenty ZT-157 IP300 4K@60Hz 4:2:0 AV Over IP System Encoder Specification:
- Audio
- Bit Depth: 24 bits
- Digital Audio sampling: 48KHz
- Format
- Dolby 5.1, Dolby True HD, Dolby Digital Plus
- DTS 5.1, DTS HD, DTS True HD
- LPCM 2.0, LPCM 2.1, LPCM 5.1, LPCM 7.1
- Frequency Response: 20Hz to 20KHz, ±1 dB
- Gain: Unbalanced output: 0 dB
- SNR: > 85 dBFS at input (A-weighted)
- Stereo Channel Separation: > 80 dB
- THD+N: -78 dBFS typical at -5.2 dBV input
- Input: 1 x 3.5mm jack
- Video
- Average Encoding Data Rate
- 1080p @ 60Hz: about 150 Mbps
- 4K @ 30Hz: about 250 Mbps
- Chroma Sampling: 4:4:4, 4:2:0
- Color Depth: 8 bits per color
- End to End Latency: 1 - 2 FPS
- Frame Rate: 24, 30, 50 or 60 FPS
- Maximum Data Rate: 8.91 Gbps (2.97 Gbps per color)
- Maximum Pixel Clock: 297 MHz
- Resolution: Up to 4K @ 60Hz
- Input: 1 x RJ45
- Output: 1 x HDMI Type A
- Specification: HDMI 1.4, HDCP 2.2, CEA-861F
- Average Encoding Data Rate
- Communications
- Control & Management Method: The front panel link DIP switch, Windows PC configurator (Z-Net Console), Z-Net on iPad, IP controller (ZT-IP100C)
- IR Connector: 1 x 3.5mm jack
- IR Carrier Frequency: 36KHz - 58KHz
- Serial Connector: 1 x 3-pin phoenix
- Serial Pin Configuration: TX-GND-RX
- Ethernet Port: LAN (POE): 10/100/1000 HDBaseT port, connect this port to a gigabit Ethernet switch for IP stream input, device control and device management.
- Ethernet IP Address: 169.254.x.x
- Ethernet DHCP: Off
- Ethernet Auto IP: On
- Ethernet Subnet Mask: 255.255.0.0
- General
- Enclosure Type: Metal
- Operating Humidity: 10% RH - 90% RH (non-condensing)
- Operating Temperature: 32°F - 113°F
- Power Supply Output: DC 12V/1A
- Power Consumption: 4W
- Rack Mount: Yes
- Regulatory Compliance: CE, FCC, RoHs
