This Zenty ZT-119 8x16 4K 60Hz HDBaseT HDMI Matrix Extender to 131ft consists of 8 HDMI input ports, 8 HDMI output ports, and 8 Ethernet ports. Experience the best quality image by connecting your 4K sources and enjoy watching content at up to 3840×2160 UHD 4K@60Hz (YUV 4:4:4), 1080p and lower for older HDMI sources that lack 4K capabilities.
With both 8 digital (SPDIF) & 8 analog (3.5mm) inputs and outputs, you get high flexibility of audio embedment and extraction. Each receiver includes 2 HDMI outputs. Different control options allow video routing your way. Switch your inputs and/or outputs by using the front panel buttons on the unit, the included IR remote, via RS-232, PC software, or Web GUI for optimal convenience and ease of use.
Zenty ZT-119 8x16 4K 60Hz HDBaseT HDMI Matrix Extender to 131ft Features:
- Connect up to 8 different HDMI input sources to the matrix and independently route your video feed to any of the HDMI outputs connected. Connect 8 HDMI displays locally via HDMI outputs and extend 8 HDMI displays via Cat5e/6 ethernet cable. (The ethernet outputs will mirror their corresponding HDMI output)
- Supported resolutions up to 4K@60Hz (4:4:4). Extend 4K60Hz up to 130ft. and 108060Hz up to 230ft. via the Cat5e/6 cables that mirror their corresponding HDMI output
- 8 digital SPDIF inputs and 8 analog 3.5mm analog inputs for audio embedding. Also 8 digital SPDIF outputs and 8 analog 3.5mm outputs for extracting audio to a separate destination
- Supports PoC; no need for power on the receiver side, receivers are powered by the HDMI matrix
- Control the unit via front panel buttons, included IR remote, RS232, or IP control via Web GUI. Utilize the dual IR feature to control your source device at the location of your display or control your display from the location of your source device
Why not buy this Zenty ZT-119 8x16 4K 60Hz HDBaseT HDMI Matrix Extender to 131ft from HDTV Supply today?
Zenty ZT-119 8x16 4K 60Hz HDBaseT HDMI Matrix Extender to 131ft Specification:
- Audio
- Audio From HDMI Output: Up to LPCM 7.1 of 48-bit / 192KHz, Dolby TrueHD, and Dolby Legacy Formats DTS:X, DTS-HD Master Audio, DTS 96KHz / 24 bits, and DTS Legacy Formats
- Digital Output Format: PCM 2.0, Dolby True HD, DTS-HD Master Audio, LPCM 7.1
- Analog Embed: 8 x 3.5mm jack
- Analog De-Embed: 8 x S/PDIF
- Output
- 8 x S/PDIF
- 8 x 3.5mm jack
- Video
- Chroma Sampling: 4:4:4 (60Hz), 4:2:0 (60Hz)
- Color Depth: 8, 10, 12 bits per color
- Color Format: RGB and YCbCr digital video
- Colors: 1 Billion (10-bit processing)
- EDID: EDID Management and EDID Copy
- Frame Rate: 24, 25, 30, 50, 60 FPS
- HDR: HDR-10, Dolby Vision (HDMI Loop)
- Maximum Data Rate: 18 Gbps (6 Gbps per color)
- Maximum Pixel Clock: 600 MHz
- Resolution: Up to 4K @ 60Hz
- Routing: 8 x 16
- Input: 8 x HDMI Type A
- Output
- 8 x HDMI Type A
- 8 x RJ45 (HDBaseT)
- Specification: DVI 1.0, HDMI 1.4, HDMI 2.0, HDCP 1.4, HDCP 2.2
- Communications
- Control Program: Web
- IR Extender: 8 x In, 8 x Out
- IR Connector: 1 x 3.5mm jack
- IR Carrier Frequency: 38KHz - 56KHz
- Serial Port: RS-232
- Serial Connector: 1 x 3-pin phoenix
- Serial Baud Rate: 115200
- Serial Data Bit: 8 bits
- Serial Stop Bit: 1 bit
- Serial Parity: None
- Serial Pin Configuration: RX-GND-TX
- Ethernet Port: 1 x RJ45
- Ethernet IP Address: 192.168.1.168
- Ethernet DHCP: Off
- Ethernet Gateway: 192.168.1.1
- Ethernet Subnet Mask: 255.255.255.0
- General
- Enclosure Type: Metal
- Operating Humidity: 5% RH - 90% RH (non-condensing)
- Operating Temperature: 23°F - 104°F
- Power Supply Input: AC 110V - 220V, 50Hz - 60Hz
- Power Consumption: 125W
- Rack Mount: Yes
- Regulatory Compliance: CE, PSE, RoHs, UL
