This Zenty ZT-113 4K 60Hz 4:4:4 HDBaseT HDMI over Ethernet Extender with Dual Outputs 130ft can transmit an Ultra-High Definition 4K signal up to 40m (130 feet) using the latest HDBaseT transmission protocol. Connect up to 3 displays at once by utilizing the Local Loop Out HDMI port located on the Transmitter, and the 2 HDMI outputs on the Receiver. Powered by bi-directional PoC, the ZT-EXB40 only requires power to be connected to either the receiver or the transmitter, allowing for a simple and convenient installation. The extender uses features multiple EDID settings, including pass-through, a Local copy, and a remote Copy, which can be changed with a simple switch on the Transmitter. The device also passes RS-232 commands, to control devices for serial communication transmission of data.
Zenty ZT-113 4K 60Hz 4:4:4 HDBaseT HDMI over Ethernet Extender with Dual Outputs 130ft Features:
- Extend your HDMI signal up to 40 meters (130 feet) over Cat5e/6 UTP cable using the latest HDBaseT transmission technology.
- This extender is HDMI 2.0 and HDCP 2.2 compliant, and can display 4K resolutions, as well as HDR (YUV 4:4:4).
- Featuring a local loop-out on the transmitter, connect a local display to the transmitter, as well as 2 outputs on the receiver allowing for a total of 3 displays.
- Supports bi-directional PoC; power only required on either the transmitter or the reciever. Multiple EDID settings such as pass-thru, copy from Local Loop-Out, or copy from receiver output.
- Bi-directional IR feature, RS232 pass-through, support for various HD audio formats including Dolby Digital, Dolby TrueHD, DTS 5.1.
Why not buy this Zenty ZT-113 4K 60Hz 4:4:4 HDBaseT HDMI over Ethernet Extender with Dual Outputs 130ft from HDTV Supply today?
Zenty ZT-113 4K 60Hz 4:4:4 HDBaseT HDMI over Ethernet Extender with Dual Outputs 130ft Specification:
- Audio
- Audio From HDMI Output: Up to LPCM 7.1 of 24-bit / 192KHz, Dolby Atmos, Dolby TrueHD, and Dolby Legacy Formats DTS:X, DTS-HD Master Audio, DTS 96KHz / 24 bits, and DTS Legacy Formats
- Digital Output Format: PCM 2.0, Dolby True HD, DTS-HD Master Audio, LPCM 7.1
- Video
- Chroma Sampling: 4:4:4, 4:2:2, 4:2:0
- Color Depth: 8, 10, 12 bits per color
- Color Format: RGB and YCbCr digital video
- Colors: 1 Billion (10-bit processing)
- EDID: EDID Management and EDID Copy
- Frame Rate: 24, 25, 30, 50, 60
- HDR: HDR-10, Dolby Vision, HLG
- Maximum Data Rate: 18 Gbps (6 Gbps per color)
- Maximum Pixel Clock: 600 MHz
- Resolution: Up to 4K @ 60Hz
- Input
-
- Transmitter:
- 1 x HDMI Type A
- 1 x IR
- 1 x RS-232
- Receiver:
- 1 x IR
- 1 x RJ45 (HDBaseT)
-
- Output
-
- Transmitter:
- 1 x HDMI Type A
- 1 x IR Output
- 1 x Cat5e/6 Output
- Receiver:
- 2 x HDMI Type A
- 1 x IR Output
- 1 x RS-232 Output
-
- Specification: DVI 1.0, HDMI 1.4, HDMI 2.0, HDCP 1.4, HDCP 2.2
- Communications
- IR Extender: For IR Remote Controller
- IR Connector: 1 x 3.5mm jack
- IR Carrier Frequency: 38KHz
- Serial Port: RS-232
- Serial Connector: 1 x 3-pin phoenix
- Serial Baud Rate: 115200
- Serial Data Bit: 8 bits
- Serial Stop Bit: 1 bit
- Serial Parity: None
- Serial Pin Configuration: TX-GND-RX
- Ethernet Port: 1 x RJ45
- General
- Enclosure Type: Metal
- Operating Humidity: 5% RH - 90% RH (non-condensing)
- Operating Temperature: 14°F - 131°F
- Power Supply Input: AC 100V - 240V, 50Hz - 60Hz
- Power Supply Output: 24W
- Power Consumption: 2.5W - 5W
- Rack Mount: No
- Regulatory Compliance: CE, PSE, RoHs, UL
