HDTV Supply's WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4-EDID Modes allows any source (PC, Blue-Ray player, HD DVD player, satellite receiver, game system, etc.) to be shown on the any of the four displays simultaneously or in any of the 256 combinations. The 4K 30 Hz 4x4 HDMI Matrix Switch supports 4K2K, 3D, and Deep Color. HDMI 1.4 supported 4K resolutions but only at 24 or 30 frames per second. Easily resolve common source and display issues by setting a custom EDID setting for your displays with the 4-EDID Modes.
HDTV Supply's WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch is designed to support the 4K display technology. The 4K 30 Hz 4x4 HDMI Matrix with HDMI 1.4 compliancy was created to improve the contrast between light & dark images for a more realistic picture featured in new 4K TVs. Since 4K is four times the resolution of 1080p, it required more bandwidth to support the extra data & that is why we have designed these HDMI switchers.
This 4K 30 Hz HDMI Matrix Switcher switches quickly without any flashing as its design is to avoid flashing, as seen by competitive HDMI matrix switchers, as it stores EDID which represents all the connected displays. This eliminates the source trying to adjust the resolution dynamically to fit the TVs, which increases usability and lowers switching time. It allows switching between sources to be as low as 2 seconds or less.
EDID Explained: The 4K 30 Hz 4x4 HDMI Matrix Switchers EDID provides for optimal source-to-screen performance. EDID will optimize the video card output for the capabilities of the end display. The EDID ghost unit enables the copying, emulating, cloning, and "learning" of EDID data from a display.
Our EDID Emulator and repeater comes with predefined presets, user programmable banks, Sink EDID sniffing bank and more. Our EDID Emulator ensures proper operation, for the best performing HDMI audio and video signal between any source and display Resolves loss of video, intermittent (flashing) video, snow, or color-space (purple or red) issues.
WolfPack WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4-EDID Modes Features:
- Supports multiplexed HDMI 4-inputs and 4-outputs
- Compatible with:
-
- Samsung UHD 4K DVD Player
- Roku 4 media player
- 4K DirecTV Genie receivers
- 4K Sony FMP-X10 UHD players
- 4K NVidia Shield UHD Netflix devices
- 4K Amazon Fire Players
- 4K Surround Sound AV Receivers
- Compliant with HDMI 1.4
- Supports reception of any audio data conforming to the HDMI specification such PCM at up to 192kHz, compressed audio (IEC 61937), DSD, DST, DTS & HBR
- Supports button, IR & RS232
- Switches HDMI between multiple sources and displays
- Allows connection of up to 4 sources to up to 4 independent displays
- Supports both HDMI audio and HDMI video
- Installs in seconds
- Supports 4K TVs at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS
- Input source LED indicated on each output
- Supports 3D frame sequential video format up to 1080p@60
- Supports high resolution VESA mode video format up to QSXGA@60Hz
- Supports smart EDID management.
Why not buy this WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4-EDID Modes today?
WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4-EDID Modes Specifications:
- Video Bandwidth: 300MHz /3 Gbps
- Supported HDMI video display resolutions:
- Up to 4K x 2K @ 30Hz
- Up to 1080p @ 120Hz
- All lower resolutions
- Supported HDMI deep color bit rates:
- 30 bits,
- 36 bits and
- 48 bits per pixel
- Supported HDMI Digital audio formats:
- DTS-HD
- Dolby-true-HD
- LPCM 7.1
- DTS and
- Dolby-AC3
- DSD
- 4K@50/60, (2160p) which is 4 times the clarity of 1080p/60 video resolution
- Up to 32 audio channels for a multi-dimensional immersive audio experience
- Up to 1536kHz audio sample frequency for the highest audio fidelity
- Support for the wide angle theatrical 21:9 video aspect ratio
- Dynamic synchronization of video and audio streams
- Supports signal retiming
- Supported cable lengths:
- Input: Up to 15 feet with an AWG24 HDMI 2.0 cable
- Outputs: Up to 35 feet with AWG22 HDMI 2.0 cables
- No signal loss of quality
- Installs in minutes
- Includes DC5V power supply
- Video Bandwidth 10.2Gbps
- Input Ports: 4 × HDMI (Female type) and 1-RS232;
- Output Ports: 4 × HDMI (Female type)
- ESD Protection Human Body model: ±8 kV (air-gap discharge) ±4 kV (contact discharge)
- Power Supply 12 V/2.5A DC (US/EU standards, CE/FCC/UL certified)
- Dimensions 440mm(W) X 130mm (D) X 45mm(H)
- Weight 1300 g
- Chassis Material Metal
- Silkscreen Color Black
- Operating Temperature 0 ˚C~40 ˚C/ 32 ˚F~104 ˚F
- Storage Temperature −20 ˚C ~ 60 ˚C/−4 ˚F ~140 ˚F
- Relative Humidity 20~90 % RH (non-condensing)
- Power Consumption 10 W
Why not buy this WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4-EDID Modes today?
This WolfPack 4K 30 Hz 4x4 HDMI Matrix Switch with 4 -EDID Modes works with the following devices:
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- An APPLE TV with HDMI outputs
- A VuDu with HDMI outputs
- A Roku with HDMI outputs
- Many PC video cards with HDMI outputs
- Any high definition camcorder with an optional type C to standard HDMI cable or standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturer's web site.
- and other similar devices.
