This WolfPack 1080p 48x48 HDMI Matrix Switcher with Video Wall Processing allows any input to be routed to any output, or the same input to be routed to all outputs, or any combination with multiple technologies.

IN & OUT CONTROL (ALL FREE): This HDMI Matrix Switch can control the Ins and Outs the following ways:

• Front Panel Control
• iPad or iPhone apps
• Android phone or Android tablet apps
• Samsung Galaxy phone or Galaxy tablet apps
• WEB GUI
• IR Remote Control aimed at the front panel. Does not pass-through IR.
• Windows Software
• Dual RS-232 and
• Dual TCP/IP control

NOTE: The above control sends any input, to any output, in any combination on a tablet. If you want to, say, change the channels on a cable box or DirecTV receiver, see our WolfPad TV Control Systems. 

Reasons that sets WolfPack 1080p 48x48 HDMI Matrix Switcher with Video Wall Processing apart from others:

1. 48x48 Chassis Size
2. Built-in Video Wall Processor
3. Fast 80ms Switching & 80ms Latency
4. All TVs in synch with each other
5. Resolution Scaling on all Out Cards
6. Separate Audio on all Cards
7. Optional HDMI Quad-View Card (4-Pics on 1-Display)
8. Uses 4-port HDMI IN & OUT Cards
9. 40-Preset Scenes that can be Saved and Recalled
10. Optional cards available like SDI, Fiber, CAT6 and more
11. 19" Rack-mountable
12. Optional Crestron, RTI, Elan & Control4 Drivers

Internal Video Wall Processing: Not only is this product an HDMI matrix switch, but it is also designed to support multiple video wall configurations. Your tablet is used to create video walls and the number of video walls is only limited by the number of outputs that you have. It supports Drag-N-Drop Video Wall Processing & setups and any TV can be rotated. See the examples below:

Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.

Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.

Separate Embedded Audio In and De-embedded Audio Out: The matrix allows you to display video with separate audio coming from another audio source as it supports embedding the audio on the input cards audio connector and then de-embedding the audio on the output cards audio.

Seamless Switching: Our WolfPack Modular HDMI Matrix Switcher can be configured with instantaneous video switching which delivers full 1080p video powered by our WolfPack engine implemented at each output port. It switches instantly taking only 80ms or 0.08 seconds. 

Hardware Scaling via DIP Switches on both in and out cards: The 8-pin DIP switch on the cards are for the up/down manual scaling of resolutions. Each HDMI card has an 8-pin DIP switch to select multiple resolution settings to conform to your HDMI source devices and the HDMI destination devices.

WolfPack 1080p 48x48 HDMI Matrix Switcher with Video Wall Processing Configuration Example:

• 1 - 48-card in and 48-out chassis
• 12 - 4-port 1080p HDMI input cards = 48-1080p HDMI inputs
• 12 - 4-port HDMI output cards = 48-1080p HDMI outputs

By having 4-port HDMI slide in cards the matrix is exceptionally reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent in for repair.

The heart of this 1080p 48x48 Modular HDMI Matrix Switcher is the chassis backplane, which allows customization of the configuration for input and output cards to match every system and application need. The matrix supports hot plugs, enabling you to change the cards while the equipment is still running.

Why not buy this WolfPack 1080p 48x48 HDMI Matrix Switcher with Video Wall Processing today?