This Universal Video Output Card is used in the below HDTV Supply line of 9x9, 18x18 and 36x36 modular matrix switchers that feature one-slot card cages using either 9, 18 or 36 of these one-port Universal Video Output Cards depending upon your system needs. By having 1-port slide-in cards the matrix is very reliable as in the unlikely even there is a loss of signal you just replace the card with a spare you have purchased or order another from us. The complete matrix doesn't have to be sent to us for a repair.
100ms Seamless Switching: This WolfPack™ Seamless card delivers 100ms instantaneous video switching. This high-performance engine processes signals by executing EDID hops and HDCP handshakes simultaneously at both the source input, the display outputs and scales the inputs for the best output resolution. It sets the output clock timing and uses a frame buffer to retain the input signal information for the fastest output.
Separate Embedded Audio In and De-embedded Audio Out: The Seamless card allows you to display video with separate audio coming from another audio source as it supports embedding the audio on the input cards 3.5mm audio connector and then de-embedding the audio on the HDMI output cards 3.5mm audio.
Hardware Scaling via DIP Switches on both in and out cards: The 8-pin DIP switch on the cards are for the manual scaling up/down. Each card has a 8-pin DIP switch to select multiple resolution settings to conform to your HDMI source devices and the HDMI destination devices.
Aspect Ratio Control: This card comes with a remote control that can change the aspect ratio of the incoming signal to fit other monitors and TVs that are not 16x9. An IR window is located on the card for the remote control. It also can change the brightness, sharpness and other settings
Universal Video Output Card Features:
- Supports one (1) Universal Video 1.1 Output
- Supported resolutions: 1080p/60 4:4:4
- Seamless switching speed of 100ms (0.1 sec)
- No latency
- Controllable via the matrices front panel buttons, RS232, WEB GUI and iOS/Android App
- High bandwidth up to 10.2 Gbps
- Built-in HDCP internal management
- Built-in EDID & DDC management
- Plug & play
EDID Learning Instruction for the Card: The card is compliant to HDCP and supports EDID management from the card as it allows you to copy the EDID from its display to make sure there are no EDID errors. Once you have connected the matrix to the TV or Projector press the EDID key twice on the card to read the displays EDID. It is that easy.
NOTE: Do not combine or use our 4K/60 cards with this 1080p Universal Video card in the same matrix chassis. These Universal Video cards are designed to work only on 1080p based systems delivering pure 1080p resolutions and cannot be combined with any 4K/60 card HDMI Matrix system.
Why not buy this Universal Video Output Card today?
HDTV Supplys R&D department has developed this MAV card to not only solve the different signals input, but also with many different unique features like 3.5mm audio embedds on the input card and de-embedds on the output cards, resolution adjustment via the 8-pin DIP switch and image 180 degree rotating.
What is a MAV card? It's has a DVI-I port, so with the different adapters (HDMI-DVI, VGA-DVI, CVBS/YPBPR-DVI) so you can have HDMI, VGA, YPBPR/CVBS sources to input or you can use the DVI signal/TV and an DVI cable directly.
Universal Video Output Card Specs:
- Output: 1 - Universal Video 1.1 (Female Universal Video)
- Output signal: Universal Video-D full digital
- Gain: 0 dB
- Bandwidth: 6.75 Gbps
- Resolution range: Up to 1080p at 60Hz
- HDCP: Yes
- Max. time-delay: 5ns (plus or minus 1ns)
- Crosstalk: <-50 dB at 5MHz
- Universal Video standards: Universal Video 1.1 and supports EDID and DDC
Why not buy this Universal Video Output Card today?
Operation - EDID Setup for the 4K30 (HDMI & HDBaseT) Input Card
Operation - For All Available Cards DIP Switcher
Operation - POC DIP Switch on the HDBaseT Card
Operation - Tips for the HDbaseT products POC Function Set Up Steps
DIP Switch Resolution Settings of Universal Cards
Specifications For All Modular Matrices Single Port Cards
Comparison Spreadsheet For All Modular Matrices Single Port Cards
Documents for the WolfPack 9x9, 18x18 & 36x36 Cards and Chassis
EDID Learning Instruction for the Cards
Why not buy this Universal Video Output Card today?
DirecTV Controller
This card used with our modular Universal Video matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced AV hardware and software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media Switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be x1&8&16. and notice the command has a period (.) at the end of the string. The matrix even replies "OK" when the right command is received and "Failed" when receiving a wrong command. Here is the RS232 User Manual if you want to write your own drivers.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
Also, CLICK HERE for our DirecTV™ & Universal Video Matrix Control Software for Bars & Restaurants
Why not buy this Universal Video Output Card today?
Slide-in Boards & HDBaseT Extenders: If a board or extender goes bad in the first 2-years & HDTV Supplys Tech Support team verifys the problem after a telephone call, HDTV Supply will send a new or like-new unit within the USA usually within 24-hours by USPS Air Priority at HDTV Supplys expense. We will ask for a credit card for payment in case the bad card is not sent back to us within 5-business days. You will need to provide us the tracking number as we will to you and you will need to pay for the cards return. In order to get a warranty replacement for a defective card HDTV Supplys Support Team will verify the product is eligible for a warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all Universals included.
HDTV Supply also sells a 3 or 5 Year warranty for this card. Please call us for a quote.