This Thor Broadcast H-RF-AMP-40 40db Bi-Directional Distribution Amplifier 54-1000Mhz COAX CATV QAM ATSC Analog RF compact 40db amplifier makes an excellent distribution system amplifier for heavily loaded MDU and broadband CATV and SMATV systems.
Because of its extremely low-noise figure and low distortion, the H-RF-AMP-40 is ideally suited for use in larger networks where amplifier cascading is required.
CATV RF QAM over coax amplification forward 54-1000mhz and Return path 5-42Mhz
The 40dB gain from off air antenna ATSC / DVB-T / ISDB-T
Analog RF - NTSC / PAL video amplification
Thor Broadcast H-RF-AMP-40 40db Bi-Directional Distribution Amplifier 54-1000Mhz COAX CATV QAM ATSC Analog RF Features:
- High output level 40dB
- High Voltage Surge Protection
- Broadband 54-1000 MHz frequency range (Channels CATV 2-158)
- High Return Loss against interference
- Power LED indicator
- Optimum for Trunk Distribution
- Hybrid module design to obtain excellent quality
- Adjustable gain and slope for fine tuning systems
- -20 dB test ports for easy trouble shooting
- 60 dBmV high output level
- 40dB gain for optimal carrier-to-noise ratio and superior picture quality
- ± 0.5dB flatness across band provides low distortion and excellent frequency response
- Employs state-of-the art hybrid push-pull technology for distortion-free audio-video quality
- Adjustable slope and gain controls for easy system balancing
- Easy-access controls and lowloss (-20dB) test point enable simplified setup and performance monitoring
- Shielded enclosure provides over 95dB RFI shielding performance reducing leakage and ingress
- Built-in lightning and line voltage surge protection protects the unit from damage
Why not buy this Thor Broadcast H-RF-AMP-40 40db Bi-Directional Distribution Amplifier 54-1000Mhz COAX CATV QAM ATSC Analog RF today?
Thor Broadcast H-RF-AMP-40 40db Bi-Directional Distribution Amplifier 54-1000Mhz COAX CATV QAM ATSC Analog RF Specifications:
- Bandwidth-CA-30/1000 : 54 ~ 1000MHz
- Bandwidth-CA-30/550: 54 ~ 550MHz
- Gain (FWD) 54~1000 MHz: 30dB
- Gain (FWD) 54~550 MHz: 30dB
- Max. Output (158 ch.) (CA-30/1000): 40 dBmV
- Max. Output (82 ch.) (CA-30/550): 43 dBmV
- Flatness: 0.5dB
- Noise Figure (FWD) CA-30/1000: 5dB
- Noise Figure (FWD) CA30/550: 4.5dB
- Composite Second Order (FWD): 70dB
- Composite Triple Beat (FWD): 61dB
- Input Test Point Loss: 20dB
- Power Input: 115VDC
- Power Required: 4Watt
- Dimensions: 8” L) x 2.75” (D) x 4.5” (H)
- Weight: 2.3 lbs.
- Input Frequency Range: 50~860 MHz
- Output Max Level: 60 dBmV
- Maximum Gain: 32 dB
- Gain Control Range: 0 ~ -20dB
- Slope Control Range: 0 ~ -20dB
- Noise Figure: 7.5 dB
- Flatness: +/-2 dB
- Return Loss: 18 dB
- Input / Output Impedance: 75 ohm
- Input / Output test point: -20 dB
- Connectors: All "F" type female
- Power requirements: AC 110V or AC 220V
- Power Consumption: 10 W
- Operating Temperature: -10 ~ 60 °C
