This Thor Broadcast F-RF-TxRx-MN2 RF Over SC/APC Optical Fiber Transmitter & Receiver Set - 1310nm for military and high-security applications. RF Fiber Breaks are used to transport the RF over a single directional fiber link. This prevents signals from being passed in the return direction. Often times this is required for high security and military applications. These units are for short distance RF over fiber applications to create a single direction RF Fiber Break. Because of the nature of RF over fiber systems, signals can only travel in one direction without return path optics. Our standard units are for CATV band 45-870 MHz, but we can also provide units for satellite bands as well as other communication system frequencies. Coax cabling represents a serious security vulnerability to any location with access to highly sensitive data. Protect your facility today with low-cost RF Fiber Breaks from Thor.
Thor Broadcast F-RF-TxRx-MN2 RF Over SC/APC Optical Fiber Transmitter & Receiver Set - 1310nm Features:
- Receiver Features
- Designed for FTTH (Fiber To The Home) Networks
- Excellent linearity and flatness
- Converts Optical siganl to electrical RF 45-10000Mhz
- Analog NTSC/PAL, Digital QAM, ATSC, DVB-T
- 20dBmV RF ouput power at Optical Input: -0 dBm
- Dual Coaxial ouput for easy deplyment for multiple devices
- Wide range of optical input power
- Single-mode fiber
- Ultra low noise technology
- Smaller size and easy to install
- Red-LED for power indication
- Color-LED for optical power indication
- Built-in filter
- Transmitter Features
- 45 -1000MHz working bandwidth.
- High performance DFB coaxial laser that has a great linking performance and stable output.
- Advanced CPU processing and with an auto monitoring system to supervise the operational status which leads to a longer life of the laser.
- Low power loss design(less than 8W) which creates a very low operational temperature
Why not buy this Thor Broadcast F-RF-TxRx-MN2 RF Over SC/APC Optical Fiber Transmitter & Receiver Set - 1310nm today?
Thor Broadcast F-RF-TxRx-MN2 RF Over SC/APC Optical Fiber Transmitter & Receiver Set - 1310nm Specifications:
- F-RF-TX-MN-2Mw Transmitter
- Wavelength: nm 1310nm ± 20 / 1550nm ± 20
- Laser type: DFB laser
- Optical modulation type: Direct optical strength modulation
- Optical connector type: SC/APC
- Frequency range: MHz: 45-862/1000
- RF input level
- dBuV: 72~82
- Flatness in band dB ±0.75
- Rf input resistance: 75
- Input reflection loss: dB ≥16
- Link C/N: dB ≥51
- Link C/CSO: dB ≥60
- Link C/CTB dB ≥65
- AGC controling range: dB ±5
- MGC controling: dB 0~10
- Power Supply: V DC 12 V/1 A
- Power Loss: W ≤ 8
- Dimension: mm: 140 x 90 x 26
- F-RF-RFMN-2 Receiver
- Light wavelength: 1100 ~1600nm
- Operating Wavelength: 1550 nm ± 20nm ,built-in for filtering 1490 nm signal and remain 1550 nm signal to photo-diode
- Optical input power range: 0dBm to ~-15dBm (digital) & 0dBm to ~-10dBm (analog)
- Frequency range: 45MHz-1GHz
- Output level: Output range: 65-75dBæV (Optical Input: -6 dBm); Output range: 70-80dBæV (Optical Input: -2 dBm))
- Flatness: ±1dB
- Slope: 5dB ± 2dB
- Return loss: 16dB
- Noise figure: 47.5dB
- CTB: ≥65dB
- CSO: ≥65dB
- MER: 38
- Power Consumption: ≥ 0.6W
- Test Conditions: 60 CH (PAL-D), Pin -6dBm, 1 EDFA with noise figure 5dB, 25Km, Composite OMI 18.5%
- Output impedance: 75 Ω
- Output port number: 1
- RF connector: F (female)
- Responsibility: ≥ 0.9 A/W @ 1550nm
- Optical return: loss ≥ 55 dB
- LED indicator: Alarm LED: Green on: receive power in range (about -6 to 0 dBm) Red: low (<-8dBm) or lost signal Power LED: Red = Power on
- Power Adapter: Input Voltage: 90-250V AC@50-60Hz; Output Voltage uncertainty = 3% without load; Output Voltage: Continous current ≥ 90% nominal current; ±5% nominal DC Voltage; Ripple Voltage (Vpp) =150mV; Voltage surge arrester equipments integrated.
- Housing material: Stainless Metal with wall-mount Flange
- Working environment: Operating temperature -20 + 55 °C
- Size (W)*(D)*(H): 36*76.5*23mm
