This Thor Broadcast F-RF-1550-Tx-8mW 1550nm RF Over Fiber Tx 45-870 MHz 2 -16 mW for Television RF (Radio Frequencies) from 45-870 MHz. Operates on 1550 C-Band wavelength for compatibility with EDFA systems. Directly converts any incoming RF signal within this band to optical RF. Transports all channels and programs over one fiber.
Can be used for point to point, or combined with PLC couplers and fiber optic splitters for point to multipoint applications. Outputs Industry standard RFoG (RF over Glass) signals that can be accepted by most fiber optic RF receivers from other manufacturers. Easy to read front panel LCD provides information and alarm data, and simplifies configuration.
This system features a highly linear DFB laser with automatic adjustment circuitry with Automatic Gain Control. For added reliability, a second internal Power Supply Unit is available as an option.
Thor Broadcast F-RF-1550-Tx-8mW 1550nm RF Over Fiber Tx 45-870 MHz 2 -16 mW Features:
- 2-16 mW Optical Power Output from a C-Band laser compatible with EDFA amps
- Can be optically amplifed to high power levels for fan type distribution
- Transports entire 45-870 MHz band even with full channel linups
- Create high security "Fiber Breaks" to eliminate coax signal return path
- Automatic Gain Control (AGC) manages RF level with no adjustment needed
- Compatible with all Thor RFoG CATV series optical receiver systems
Why not buy this Thor Broadcast F-RF-1550-Tx-8mW 1550nm RF Over Fiber Tx 45-870 MHz 2 -16 mW from HDTV Supply today?
Thor Broadcast F-RF-1550-Tx-8mW 1550nm RF Over Fiber Tx 45-870 MHz 2 -16 mW Specification:
| *All Specifiactions Subject to Change Without Notice | |||
| Input |
1x Type-F connector - 75 Ohm |
||
| Optical Wavelength | 1550nm | ||
| Line Width: | < 1 MHz FWHM | ||
| Extinction Ratio | >20 dB XP | ||
| Equivalent Noise Intensity | < -160 dB/Hz | ||
| Output Power | F-RF-1550-TX-2mW 1550nm +2dBm output RF Transmitter F-RF-1550-TX-4mW 1550nm +4dBm output RF Transmitter F-RF-1550-TX-8mW 1550nm +8dBm output RF Transmitter F-RF-1550-TX-16mW 1550nm +14dBm output RF Transmitter |
||
| Return Loss | >55 dB | ||
| Optical Connector |
SC/APC - Angle Polished IMPORTANT NOTE*** (it is very important to interface our unit with SC/APC - Angle Polished Connector to avoid any light reflections. If your fiber is terminated with the SC, ST, FC /PC flat connector, you need to use an optical jumper from PC type to SC/APC for proper conversion. |
||
| RF Power Level | 11-29 dBmV AGC Managed | ||
| Flatness | <± 0.75 45 - 862 MHz | ||
| SBC Restrain | >17 dBm | ||
| CNR | >50 dB @ 10km fiber length | ||
| CTB | < -63 dB | ||
| CSO | < -57 dB | ||
| Dimensions | 19 x 10 x 1.75 inch | ||
| Weight | 2.5 kg | ||
| Operating Temperature | 0 - 45 °C | ||
Why not buy this Thor Broadcast F-RF-1550-Tx-8mW 1550nm RF Over Fiber Tx 45-870 MHz 2 -16 mW from HDTV Supply today?
Thor Broadcast F-RF-1550-Tx-8mW User Manual
Thor Broadcast F-RF-1550-Tx-8mW Datasheet
