This Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km are designed to increase the range of digital SD-SDI or HD-SDI video signals over singlemode or multimode fiber optic cable. SDI is normally carried over coax cable on BNC connectors, however the maximum cable distance is limited to around 100 meters. Similar to Rattler products, the Thor SDI extenders increase this distance to more than 80 miles by using lasers to send the data over fiber optic cable.
Compact HD-SDI transmitter and receiver kits are available with many different options for different fiber distances and different types of audio options. Models are available for 10, 20, 40, or 80 km. Most models use a combination of 1310nm and 1550nm optics for the forward and reverse path. Contact Thor for more available options.
Thor F-M2SDI fiber optic SDI transmitters and receivers use locking type ST or FC fiber connectors and BNC video cables to ensure that any cable is not accidentally pulled out of the device once the equipment is installed. Adapter jumpers are available by request for most types of fiber cables if a different fiber connector type is required. Options are available for both singlemode or multimode fiber, and a range of transmitter power options can be selected.
Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Features:
- Supports 2 Full HD-SDI @ 1.5Gbps or lower SDI digital video
- Transports 2ch embedded audio channels as well as SDI ancillary data on each SDI
- Return path serial RS-485 channel for controlling equipment on Tx end
- Link alarm indicators on both Tx & Rx indicate a problem with the fiber
Why not buy this Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?
Thor Broadcast F-M2SDI-Tx/Rx 2Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Specifications:
HD-SDI Input |
HD-SDI, SD-SDI, or (DVB-ASI suported only on F-2ASI-TX/RX CWDM models) 0 - 1.5 Gbps Serial Digital Signal (3G SDI avialable) |
Number of Input | 2 SDI 1 RS-485 1 Auxiliary |
Signal Level | > 380mVp-p |
Impedance | 75Ω |
Connector | BNC |
Distance | 20Km (40,60,80.100Km - model dependent ) |
Mini box | 25×116×110 |
Power Supply | 130 - 260 VAC @ 50-60 Hz |
Power Consumption | <10W |
Temperature | 0 to +70 Degree |
Humidity | 0 to 95% |
Connector | ST/PC ( SC/PC or FC/PC or SC/APC available on request) |
Optical Channels | TDM Multiplexing |
RH AUDIO |
Non-condensing Unit supports 2 channels of embedded SDI audio or 2ch Analog Audio if AUX Audio cards are used. The unit has embedded audio or external analog, Not both at the same time, |