This Thor Broadcast F-M1SDI-Tx/Rx 1Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km are designed to increase the range of digital SD-SDI or HD-SDI video signals over single mode or multimode fiber optic cable. SDI is normally carried over coax cable on BNC connectors, however, the maximum cable distance is limited to around 100 meters. Thor SDI extenders increase this distance to more than 80 miles by using lasers to send the data over fiber cable. TX/RX kit F-M1SDI-TX/RX with ST/PC connector, supports single mode fiber up to 20Km or 2000 feet over multimode fiber
Cabled (coax-to-fiber) throw-down converter compact, rugged, and portable converter boxes. Super-easy to use, supports SMPTE 424M, 292M, and 259M as well as ASI and MADI audio. Its wide operating range from 5Mbps to 1.5Gbps, (3G-SDI 3Gbps model available*) supports most professional digital serial communications. Full error-free pathological pattern operation is fully compatible with professional fiber video interfaces. Single channel SDI fiber links are the smallest Micro units that are suitable for a wide range of applications identical to where rattlers are used.
Single channel SDI fiber links are highly compact units that are suitable for a wide range of applications identical to where rattlers are used. Common uses include mounting on broadcasting cameras to simplify cable distribution. Another common application is for high end security systems. The F-M1SDI platform is ideal for security applications where the RS-485 serial data channel can be used to control pan, tilt, and zoom controllers at the camera mount. This also simplifies cabling.
Thor Broadcast F-M1SDI-Tx/Rx 1Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Features:
- Supports full rate HD-SDI @ 1.5Gbps or lower SDI or ASI digital video
- 3G SDI model available : F-M1SDI-3G-TX / RX
- Transports embedded audio channels as well as SDI ancillary data
- Return path serial RS-485 channel for controlling equipment on Tx end
- Link alarm indicators on both Tx & Rx indicate a problem with the fiber
- Status indicators for data rate and lock
- Small rugged portable standalone package ideal for portable installations
- Pathological test patterns are only supported on 3G SDI model
Why not buy this Thor Broadcast F-M1SDI-Tx/Rx 1Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km today?
Thor Broadcast F-M1SDI-Tx/Rx 1Ch HD-SDI Transmitter and Receiver Kit over Singlemode Fiber ST/PC 20km Specifications:
HD-SDI Input |
HD-SDI, SD-SDI, or DVB-ASI 0 - 1.5 Gbps Serial Digital Signal (3Gbps SDI model available) Input Signal Standard : SMPTE292M,SMPTE259M,SMPTE297M,SMPTE310, SMPTE305(SDTI), DVB-ASI(EN50083-9) , Medi Audio |
Number of Input | 1 SDI -(BNC) 1 RS-485 (Terminal block) |
Signal Level | > 380mVp-p |
Impedance | 75Ω |
Connector | BNC |
Distance | 20/20/60/80/100Km - model selection |
Mini box | 93.2 x 46.2 x 29.6mm |
Power Supply | 130 - 260 VAC @ 50-60 Hz |
Power Consumption | <10W |
Temperature | 0 to +70 Degree |
Humidity | 0 to 95% |
Connector | ST/PC or SC/PC or FC/PC per request |
Optical Channels | CWDM type 1310nm/1550nm |
LED Status Indicator PowerRH |
Power, Link Non-condensing |