This Thor Broadcast F-4A-XLR-PHP-TxRx 4 XLR Analog Audio With 48V DC Phantom Power is a professional stage transmission equipment developed by our company, with independent intellectual property rights. Absorbing the advantages of similar products at home and abroad, combined with the actual demand of the market, we launched the broadcast XLR balanced audio fiber optic converter, using FPGA, digital code, and clock recovery technology, with high integration, high stability, and high intelligent noise reduction system. To ensure the reliability, consistency, and stability of the equipment for soft rising or falling ramp waves and simulated squelch with a 100dB signal-to-noise ratio (SNR) without popping sound operation. Combined with the application requirements of the scenario, the product is more flexible and practical.
CWDM technology realizes multi-channel signal transmission,on the basis of it, video, data, network, telephone, contact closure, and other functions can be added according to different application scenarios. Plug and pull board card design, support 4U chassis, convenient for users to manage uniformly, maintenance, The diversity of optical ports support 1*9 fiber module, SFP fiber module (plug and pull fiber module design, can be replaced according to the actual requirements of the site, it is simple to operate, plug and play), this series of products have been in commercial operation for a long time. Practice has proved that the product has stable performance, simple installation, easy maintenance, and it is suitable for large-scale commercial operation.
Thor Broadcast F-4A-XLR-PHP-TxRx 4 XLR Analog Audio With 48V DC Phantom Power Features:
- Incorporates CWDM (Coarse Wavelength Division Multiplexing) technology for the transmission of one or multiple channels of analog balanced XLR audio.
- Each audio channel is equipped with an adjustable phantom power switch to control 48V phantom power.
- Advanced FPGA-based digital coding and clock recovery technology for improved signal reliability.
- Integrated high-pass filter to effectively remove DC offset.
- Intelligent noise suppression system with soft-rise and soft-fall ramp waveforms and simulated squelch, ensuring a 100dB signal-to-noise ratio (SNR) without distortion.
- The audio interface includes Level 3 lightning protection, compliant with IEC61000-4-5 (8/20μs) for differential mode protection up to 6kV.
- Standard single-mode fiber optic transmission supports distances up to 20 kilometers.
- Features LED status indicators to monitor operational conditions.
- Easy plug-and-play setup with no configuration necessary.
- The kit includes both the transmitter and receiver units, with clear differentiation between the two
Why not buy this Thor Broadcast F-4A-XLR-PHP-TxRx 4 XLR Analog Audio With 48V DC Phantom Power from HDTV Supply today?
Thor Broadcast F-4A-XLR-PHP-TxRx 4 XLR Analog Audio With 48V DC Phantom Power Specification:
Fiber parameter |
||
Wavelength |
1310nm & 1470nm~1610nm (selected according to the function of the device) |
|
Transmitter power |
> -7db |
|
Receiver sensitivity |
> -24db |
|
Fiber connector |
ST (SC, FC, LC optional + additional cost) |
|
Audio parameter |
||
Signal level |
0-8Vp-p |
|
Dynamic bandwidth |
101 dB |
|
Total harmonic distortion (THD) |
-90 dB |
|
Sampling frequency |
192 KHz |
|
Audio A / D sampling |
24 Bit |
|
Signal-to-noise ratio (SNR) |
100 dB |
|
Amplitude-frequency characteristic |
≤±0.5 dB |
|
Audio input / output impedance |
And 600 Ω in equilibrium |
|
Audio maximum input / output voltage |
0~4V /0~2.5V |
|
Audio gain |
±0.1 dB |
|
Maximum input level |
≥9.5 dBm |
|
Non-linear distortion |
≤0.2% |
|
Audio physical interface |
Dual-on (Transmitter) |
|
Cannon Head (receiver) |
||
Working parameter |
||
Working temperature |
-20 to 70°C |
|
Storage temperature |
-40 to 85°C |
|
Relative humidity |
5 to 95% (non-condensing) |
|
Working life |
> 100000 hours |
|
Power supply mode |
||
Desktop type |
DC 12V1A |
|
Power dissipation |
< 2W |
|
Rack type |
AC 110~240V 50/60Hz |