This Thor Broadcast Cobra II Bi Directional SD HD 3G 12G SDI+ Analog Audio + RS232, 485, 422 Data + Tally Fiber Optic Transceivers is a revolutionary 12G-SDI UHD multi-function fiber optic transmitter and receiver set that combine multiple inputs and outputs to meet client demand in the Live Video market. Through a single optical fiber, these units can transmit one channel of bidirectional 12G-SDI video, bidirectional 3.5 stereo audio, and bidirectional RS232/485/422 serial port data/bidirectional tally signal with CWDM technology. All of this is achieved with zero delay and no compression, ensuring high-quality signal extension up to 10km.
Each unit has an SDI loop ouput for local signal monitoring
These are easy-to-use plug-and-play devices. The set includes the transmitter, receiver, and both power supplies. LC/PC connectors are standard. They are effective in both hot and cold weather and are, of course, resistant to electromagnetic interference.
Thor Broadcast Cobra II Bi Directional SD HD 3G 12G SDI+ Analog Audio + RS232, 485, 422 Data + Tally Fiber Optic Transceivers Features:
- One-channel bidirectional SD, HD, 3G or 12G-SDI video transmission; the transmitter has SDI video loop-out and HD audio and video
- CWDM optical multiplexing allows ultra-low delay - 1ms
- SDI Video formats supported: ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G), ST-292 (HD), and ST-259 (SD); compatible with DVB-ASI and AES10 (MADI).
- Supports up to 16 embedded SDI audios.
- Both the transmitter and receiver feature reclock functionality.
- The signal input includes an automatic cable equalization (EQ) function, and the output features drive (CD) functionality.
- One-channel bidirectional 3.5 stereo audio transmission Independent
- Transparent transmission of RS232/485/422 serial port data.
- One-channel bidirectional tally signal.
- Single-mode Fiber with a 10km transmission distance.
- One Simplex LC/PC Optical connector
- Plug-and-play operation; power supplies are included.
Why not buy this Thor Broadcast Cobra II Bi Directional SD HD 3G 12G SDI+ Analog Audio + RS232, 485, 422 Data + Tally Fiber Optic Transceivers from HDTV Supply today?
Thor Broadcast Cobra II Bi Directional SD HD 3G 12G SDI+ Analog Audio + RS232, 485, 422 Data + Tally Fiber Optic Transceivers Specification:
|
Fiber parameters |
|
|
Wavelength |
1270/1330/1470/1490nm |
|
Fiber type |
9/125um single-mode |
|
Transmitter power |
0~-3dB |
|
Receiver sensitivity |
>-10dB |
|
Fiber connector |
LC |
|
Optical Distance |
Single Mode Fiber 10km |
|
Video parameters |
|
|
Protocol standard |
SMPTE ST-2082 |
|
SMPTE rate |
270Mbit/s,1.48Gbit/s,2.97Gbit/s,5.94Gbit/s, 11.88Gbit/s |
|
SDI SMPTE |
259M SD-SDI 480i,576i |
|
344M ED-SDI 480P, 576P |
|
|
292M HD-SDI 720P, 1080i |
|
|
424M 3G-SDI 1080P60Hz |
|
|
ST-2081 6G-SDI 2160P30Hz |
|
|
ST-2082 12G-SDI 2160P60Hz |
|
|
EQ mode |
11.88Gbps at 75m |
|
5.94Gbps at 120m |
|
|
2.97Gbps at 200m |
|
|
1.485Gbps at 300m |
|
|
270Mbps at 600m |
|
|
Signal amplitude |
800mV±10% |
|
Impedance |
75Ω |
|
Connector |
BNC IEC169-8 standard |
|
Audio parameters |
|
|
Sampling frequency |
48K |
|
Sampling depth |
24bit |
|
Dynamic bandwidth |
96db |
|
Total harmonic distortion (THD) |
-88db |
|
Signal to noise ratio (SNR) |
96db |
|
Audio input/output impedance |
600Ω |
|
Signal level |
VPP 3.5V |
|
Physical interface |
3.5mm stereo audio socket |
|
Signal type |
Stereo Audio |
|
Data parameters |
|
|
Standard |
EIA RS-232,RS-485,RS-422 standard |
|
Physical interface |
Industrial terminal/3.81mm |
|
Baud rate |
50bps to 115200 kbps (support non-standard baud rates) |
|
RS232 |
3-wire(RXD,TXD,GND), full-duplex, point to point communication |
|
RS485 |
2-wire (A, B), half-duplex, point to multi-master-slave communication |
|
RS422 |
4-wire, full-duplex |
|
RS485 circuit parameters |
|
|
RS-485 pull-up resistance/pull-down resistance |
4.7 kΩ,4.7 kΩ |
|
RS-485 terminal resistance |
N/A,120 Ω and 120 kΩ |
|
Tally signal parameters |
|
|
Level type |
TTL(5V)/LVTTL(3.3V) |
|
Input level range |
3.3V~12V |
|
Output level parameter |
0V or 3.3V |
|
Default state |
No-voltage output (0V) |
|
Physical interface |
Industrial terminal / 3.81mm |
|
Mechanical & Environmental Parameters |
|
|
Shell |
|
|
Product size |
116x128x30mm / 4.57"x 5.04" x 1.18 inches |
|
Storage temperature |
-40°C ~+85°C |
|
Relative humidity |
5 to 95% (non-condensing) |
|
MTBF |
> 10,0000 hours |
