WolfPack 2 Port HDMI Switch - Switches Turned On Devices

HDTV Supply

2 Port HDMI Switch - Switches Turned On Devices
$25.00
Part Number:
HDTVEX0201310
Availability:
Usually ships the same business day
1:
This 2 Port HDMI Switch features that it automatically recognizes turned on devices and goes to them
2:
Built-in 3 foot HDMI cable & 2D & 3D rated
Make a Fair Offer
Ask an Expert
This 2 Port HDMI Switch recognizes turned ON devices & goes to them hence no remote control is needed! Built-in 3 foot HDMI cable.

2 Port HDMI Switch Features:

  • New custom 2D and 3D firmware - only from us
  • Automatically switches when you turn a product on
  • No power supply needed as powered from the HDMI source.
  • Manual switching button is provided.
  • HDMI V1.3b compatible.
  • Connects 2 HDMI devices to a single HDTV
  • Built-in 3 foot HDMI cable
  • Compatible with all High Definition resolutions
  • Video amplifier bandwidth: 2.25 Ghz
  • Compatible format support: DVI, HDMI and HDCP
Anytime a different device is powered on, the 2 Port HDMI Switch automatically routes the signal directly to your HDTV. No buttons to push, no remote controls to lose just 2 HDMI inputs going to 1 HDMI output.

When there are more than one sources connected to the 2:1 HDMI Switch. The user should leave the desired source on, the others off. Then the 2 Port HDMI Switch will choose this source automatically and sending the signal to the display. If several sources are all powered on, the last powered source will be chosen. Because of this character, user could use the method of power off/on the source to choose the desired signal.

NOTE: A few devices like some DirecTV satellite receivers are "always ON" so auto-sensing switchers, like this one, need the "always On" devices, to be at a higher video input.

Why not buy this 2 Port HDMI Switch today?

2 Port HDMI Switch Specs:

  • Compact size.
  • No need of remote.
  • No need of power supply in most cases.
  • Switching: Auto selecting any active input signal of the two to the output.
  • Signaling rates up to 2.25Gbits in support of 1080P display.
  • 8dB receiver equalization to compensate for 5m HDMI cable losses.
  • 3dB driver pre-emphasis to compensate for PCB losses.
  • Each port supports HDMI or DVI inputs.
  • HDCP compliant.
  • HDMI 1.3 compliant.

Why not buy this 2 Port HDMI Switch today?

This 2 Port HDMI Switch can be used with:

  1. Any high definition Dish Network and DirecTV receiver with HDMI outputs
  2. High definition TiVo's with HDMI outputs
  3. Any high definition cable receiver with HDMI outputs
  4. Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
  5. Any "Over The Air" (OTA) high definition receiver with HDMI outputs
  6. Sony PS3, HD DVD and Blu-ray DVD players
  7. Any Xbox360 with HDMI outputs
  8. Any upconverting DVD player with HDMI outputs
  9. Any DVHS VCR with HDMI outputs
  10. An Roku with HDMI outputs
  11. An Vudu with HDMI outputs
  12. An APPLE TV with HDMI outputs
  13. Many PC's with the appropriate video card resolution and frame rate
  14. Any high definition camcorder with an optional type C to standard HDMI cable
  15. Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
  16. Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
  17. All HDMI 1.3b compliant devices as well as with older 1.0, 1.1, 1.2 and 1.3 versions
  18. and other similar devices.

Why not buy this 2 Port HDMI Switch today?