This SurgeX SX-20NE-RT Branch Circuit Whole Room Surge Protector & Power Conditioner - 20A/120V x1 is the SurgeX SX20NERT branch circuit surge eliminator with remote control provides guaranteed surge elimination and conditioning for audio, video, and mission critical equipment at the service panel.
To offer a proper power foundation, surge protection and conditioning should be installed at the branch circuit level to guarantee full coverage and lessen the need for extra protection downstream.
The SurgeX Branch Circuit lineup provides guaranteed whole room surge protection and conditioning for audio, video, and mission critical equipment at the service panel. Available in three configurations, these solutions are built with NEMA magnetic shielding steel enclosures that meet code for use at the service entrance, sub-panels, and in ceiling plenums.
Engineered with Advanced Series Mode surge elimination and power conditioning technologies, that eliminate all surge energy to properly protect connected equipment from surges, spikes, and electrical transients without producing harmful ground contamination or common-mode disturbances. It shall withstand at least 1000 occurrences of surge pulse voltages up to 6000 volts with zero let through voltage.
SurgeX SX-20NE-RT Branch Circuit Whole Room Surge Protector & Power Conditioner - 20A/120V x1 Features:
- NEMA rated magnetic shielding steel enclosure
- Inrush current elimination (SX-20NE-RT)
- Remote turn-on (SX-20NE-RT)
- Self-circuit with visual indicator (SX-20NE-RT)
- Non-sacrificial components
- SX20NERT Branch Circuit Surge Eliminator with Remote Control, Single Circuit, 120V/20A
- Branch circuit surge eliminator with remote control
- Advanced Series Mode surge elimination
- Impedance Tolerant EMI/RFI filtering
Why not buy this SurgeX SX-20NE-RT Branch Circuit Whole Room Surge Protector & Power Conditioner - 20A/120V x1 today?
SurgeX SX-20NE-RT Branch Circuit Whole Room Surge Protector & Power Conditioner - 20A/120V x1 Specifications:
- Load Rating: 20A
- Voltage Rating: 120V
- Power Requirement (No Load): 15W
- Surge Let-Through Voltage (6000 Volt Surge): 0 Volts
- Maximum Applied Surge Voltage: 6000 Volts
- Maximum Applied Surge Current: Unlimited (Due to current limiting - 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41)
- Maximum Applied Surge Energy: Unlimited (Due to current limiting - 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41)
- Endurance (C62.41-1991 Category B3 Pulses): 1KV > 500,000; 3KV >10,000; 6KV >1,000
- EMI/RFI Filter:
- Normal Mode (50Ω Load):
- >20dB 120kHz-50MHz
- >30dB 150kHz-50MHz
- 11dB @ 100kHz; 55dB @ 300kHz
- 72dB @ 3MHz; 48dB @ 30MHz
- Common Mode (50Ω Load):
- >10dB 350kHz-50MHz
- >20dB 1.8kHz-7.875MHz
- >30dB 6.25kHz-42MHz
- 9dB @ 300kHz; 17dB @ 1MHz
- 28dB @ 5MHz; 35dB @ 20MHz
- Normal Mode (50Ω Load):
- Under-Voltage Auto Shutdown: No
- Over-Voltage Auto Shutdown: No
- Over-Current Auto Shutdown: Circuit Breaker
- Over-Temperature Auto Shutdown: None
- Network Port: No
- Serial Port: None
- Temperature Sensor Input: None
- Auxiliary Relay Outputs: 2x screw terminal
- Contact Closure Input: 2x screw terminal
- Dimensions (HxWxD): 12 x 12 x 4"
- Weight: 12Lbs
- Temperature Range: 41° to 95°F (5° to 35°C)
- Humidity Range: 5 to 95% RH, non-condensing
- Agency Listings: Conforms to UL Stds 1283 & 1449; Certified to CSA Std C22.2 No. 8
Why not buy this SurgeX SX-20NE-RT Branch Circuit Whole Room Surge Protector & Power Conditioner - 20A/120V x1 today?
SurgeX SX-20NE-RT Specifications
