This SurgeX SA-20-AR STANDALONE Power Surge Protector & Conditioner w/IP Control - 20A/120V x 2, Surge Elimination Outside of a Rack
The SurgeX SA-20-AR is engineered to safeguard independent audio and video equipment in any environment. This compact surge protection solution fits alongside standalone equipment, takes up minimal space, and is perfect for AV, security, and computer systems that are installed outside of a rack.
Featuring Advanced Series Mode surge elimination technology, the SurgeX Standalone product line provides premium protection for sensitive equipment that relies on audio and video performance. Its patented power protection technology is non-sacrificial and eliminates surge energy up to 6,000 Volts, without producing harmful side effects such as ground contamination or common mode disturbances that can degrade the performance of AV systems.
Is complete with Box Level power management, is IP Addressable, without Internal Log, and contains DMU software.
SurgeX SA-20-AR STANDALONE Power Surge Protector & Conditioner w/IP Control - 20A/120V x 2 Features:
- Protects audio video based equipment outside of a rack
- Improves audio and video performance
- Advanced Series Mode r surge elimination technology
- Impedance Tolerantr EMI/RFI filter
- 100% fail-safe protection, never requires reset
- Compact design
- A-1-1 Certified
- SA20AR Axess Ready IP Enabled Standalone Surge Eliminator, 2 Outlets, 20A / 120V
- Provides 100% fail-safe, non-sacrificial protection
- Eliminates surge energy up to 6,000 volts/3,000 amps
- SurgeX Advanced Series Mode surge elimination technology and EMI/RFI filtering
- Protects audio video based equipment from power disturbances and catastrophic damage
- Improves audio and video performance
- Compact design
- A-1-1 Certified
- Limited lifetime and limited five years connected protection warranty
Why not buy this SurgeX SA-20-AR STANDALONE Power Surge Protector & Conditioner w/IP Control - 20A/120V x 2 today?
SurgeX SA-20-AR STANDALONE Power Surge Protector & Conditioner w/IP Control - 20A/120V x 2 Specifications:
- Load Rating: 20A
- Voltage Rating: 120V
- Power Requirement (No Load): 15W
- Surge Let-through Voltage (6000 Volt Surge): 0 Volts
- Maximum Applied Surge Voltage: 600 Volts*
- Maximum Applied Surge Current: Unlimited (due to current limiting)*
- Maximum Applied Surge Energy: Unlimited (due to current limiting)*
- Endurance (C62.41-1991 category B3 pulses): 1 KV > 500,000; 3 KV > 10,000; 6 KV > 1000
- EMI/RFI Filter:
- Normal Mode (50Ω Load):
- > 20 dB, 38 kHz - 50 MHz
- > 30 dB, 160 kHz - 50 MHz
- 25 dB @ 100 kHz
- 39 dB @ 300 kHz
- 60 dB @ 3 MHz
- 44 dB @ 30 MHz
- Common Mode (50Ω Load):
- > 10 dB, 280 kHz - 50 MHz
- > 20 dB, 1.7 MHz - 50 MHz
- > 30 dB, 9 MHz - 27 MHz
- 11 dB @ 300 kHz
- 19 dB @ 1 MHz
- 26 dB @ 5 MHz
- 34 dB @ 20 MHz
- Normal Mode (50Ω Load):
- Under-Voltage Auto Shutdown: No
- Over-Voltage Auto Shutdown: No
- Over-Current Auto Shutdown: Circuit Breaker
- Over-Temperature Auto Shutdown: None
- Measure Accuracy: Voltage, Current, Power, Energy, & Temperature: N/A
- Network Port: Single 10/100 Unshielded Twisted Pair Ethernet Jack
- Serial Port: None
- Temperature Sensor Input: None
- Auxiliary Relay Outputs: No
- Contact Closure Input: No
- Dimensions (HxWxD): 4.0 x 10.2 x 4.2"
- Weight: 8.5Lbs
- Temperature Range: 41° to 95°F (5° to 35°C)
- Humidity Range (RH): 5 to 95% (non-condensing)
- Agency Listings:
- Conforms to UL Stds 1283 & 1449
- Certified to CSA Std C22.2 No. 8
Please Note! * - 1.2 x 50 microsecond industry standard combination wave surge as per IEEE C62.41
Why not buy this SurgeX SA-20-AR STANDALONE Power Surge Protector & Conditioner w/IP Control - 20A/120V x 2 today?
SurgeX SA-20-AR IC Specifications
