This PureLink HTE-T III TX/RX 4K-HDR over HDBaseT Extension System - TAA Complaint boosts up your video/audio transmission distance to 100m (330ft) in HDTV 1080p with 36-bit color depth and 70m (230ft) at 4K-HDR. With the advanced design for the latest HDMI 2.0a technology, deep color video, DTS-HD or Dolby TrueHD audio, and HDCP 2.2 supports and compatibility are all further insured.
PureLink HTE-T III TX/RX 4K-HDR over HDBaseT Extension System - TAA Complaint Features:
- HDMI 2.0a compliant
- 4K2K@60 4:4:4 8bits
- HDR 4K2K@60 4:2:0 10bits
- Extends HDMI signal up to 100m (330ft) from the HDMI source at Full HD 1080p 36-bit, 70m (230ft) at 4K2K@60 444 (4K-HDR Technology)
- PoC (Power over Cable) which can power both units from TX or RX side with power supply
- ARC on transmitter & receiver unit
- CEC support
- Auto equalization
- Pure unaltered uncompressed 7.1ch digital HDMI over Cat.5/5e/6 cable transmission
- DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
- Full frequency IR signal from 20KHz to 60KHz
- Bi-directional IR path-through
- Integrated port for LAN/network device
- Full Duplex RS-232 control up to 115,200 bps through connector
- Wall mounting housing design for easy and robust installation
- Video latency less than 20 ms.
Why not buy this PureLink HTE-T III TX/RX 4K-HDR over HDBaseT Extension System - TAA Complaint today?
PureLink HTE-T III TX/RX 4K-HDR over HDBaseT Extension System - TAA Complaint Specifications:
Hardware
- Input Signal Type(s):
- TX: 1x HDMI / 1x 3.5mm
- RX: 1x RJ-45 / 1x 3.5mm
- Output Signal Type(s):
- TX: 1x RJ-45 / 1x 3.5mm/ 1x SPDIF
- RX: 1x HDMI / 1x 3.5mm / 1x SPDIF
- IN/OUT:
- TX: 1x RS-232 / 1x RJ-45 (Ethernet)
- RX: 1x RS-232 / 1x RJ-45 (Ethernet)
Performance
- Video Support: HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
- Supported Audio Formats: Surround sound [up to 7.1ch) or stereo digital audio
- HDCP Compliance: Yes
- Compliance: HDMI 2.0a
- Video Bandwidth: Single-link 600MHz [18Gbps]
- Equalization: Auto
- HDMI OVER UTP: 1080p@60 100m (330ft) [CAT5e]
- INPUT TMDS SIGNAL: 1.2 Volts [peak-to-peak]
- PCB STACK-UP: 6-layer board [impedance control — differential 100Ω; single 50Ω]
- IR PASS-THRU: Bi-directional
- RS-232: Yes
- PoC SUPPORT: Yes
- HDMI SOURCE CONTROL: Controllable via IR pass-through from RX to TX with IR extenders
- ESD Protection: Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
- Power Consumption:
- TX: 15 Watt [max]
- RX: 15 Watt [max]
- Power Supply: 24V 1A DC
- Operating Temperature: 32° ~ 117° F (0° to 47° C)
- Storage Temperature: - 40° ~ 158° F (-40° to 70° C)
- Relative Humidity: 0 ~ 90% non-condensing
- MTBF: 50,000 hours
- Input DDC Signal: 5 Volts [peak-to-peak, TTL]
- ROTARY CONTROL SWITCH: None
Connections
- Connector Type(s):
- HDMI CONNECTOR: Type A [19-pin female]
- MIN DIN CONNECTOR: DIN-9
- RJ-45 CONNECTOR: WE/SS 8P8C(Reverse Mode)
- 3.5MM CONNECTOR: TX - IR receiver / IR blaster RX - IR receiver / IR blaster
Enclosure
- Enclosure Type: Metal enclosure
- Product Dimensions: 153 x 73 x 21 mm [6
- Product Weight:
- TX: 160g[5.6 oz]
- RX: 188g[6.6 oz]
- Product Dimensions: 12.21 x 7.09 x 2.76 in. (310 x 180 x 70 mm)
- Product Weight: 7.7 lbs (3.5 kg)
Warranty
- Warranty: Limited Warranty (3-Years)
Why not buy this PureLink HTE-T III TX/RX 4K-HDR over HDBaseT Extension System - TAA Complaint today?
PureLink HTE-T III TX/RX Specifications
