This PunQtum RIE-9301347 Q210 PW SPEAKER STATION gives you full control in a cost-effective and easy-to-use package. With 4 Channel communication and mobile app connectivity.
Equipped with programmable buttons for muting all mics, making paging announcements or triggering logic outputs. With a built-in network switch with 4 ports. With a built-in 4-port network switch, each speaker station can support up to 4 punQtum wireless app connections, meaning a total of 8 possible connections and limitless daisy-chaining capabilities.
The Q210 PW Speaker Station is your complete, self-contained communication hub for wired and wireless communication
PunQtum RIE-9301347 Q210 PW SPEAKER STATION Features:
- 4-channel partyline speaker station
- Compatibility with punQtum Wireless - up to 4 mobile devices
- Built in loudspeaker
- Microphone and headset connector
- Rugged, Ethercon™ connectors
- Easy-to-read colour display
- 4 configurable buttons for PA announcements, talk to all, and GPO
- Audio replay of missed comms
- GPI inputs and outputs
- Analogue inputs/outputs (2x 4-wire ports + 2x inputs + 2x outputs)
- Built-in PoE switch to power up to 8 beltpacks or a wireless access point
- 2 Public address output
- 2 Program signal inputs
- On- and Offline configuration software (Win/ Mac)
Why not buy this PunQtum RIE-9301347 Q210 PW SPEAKER STATION today?
PunQtum RIE-9301347 Q210 PW SPEAKER STATION Specifications:
- General Specifications
- Power Source: 50 … 54 VDC
- PoE Power: 30W per PoE port
- Sampling Rate: 16 kHz
- Headset Connector: XLR 4pin male
- Connector Ethernet/LAN: 4x RJ-45 EtherCon
- Microphone Connector: 1/4“ jack with 7/16“ -20 UNF thread
- Built-in Speaker: 5 Watts
- Operating Temp.: -10° to +50°C
- Operation Environment Humidity: 0 to 90% non-condensing
- H x W x D: 19“ 1HU: 100 x 433 x 44 mm
- Weight: 1.7 kg
- Headphone Output
- Output impedance: 27 Ohm
- Output level: + 18.5 dBu (max.)
- Frequency response: 20Hz to 7kHz (+0/-1dB)
- Distortion @ 1kHz: <-73 dB (0.02%)
- Dynamic range (20kHz): 95 dB (A-weighted)
- Microphone Input
- Bias Voltage: 5.4V (typ.)
- Full-scale input range: -53 … +4 dBu
- Distortion @ 1kHz
- < -75 dB (0.02%) @ + 4dBu FS (min. gain)
- < -68 dB (0.04%) @ -30dBu FS
- < -49 dB (0.35%) @ -53dBu FS (max. gain)
- Dynamic range
- 92 dB (min. gain)
- 59 dB (max. gain)
- Analog Interface Outputs
- Input Impedance: < 2 Ohm
- Input Level: + 18 dBu (max.)
- Frequency Response: 20Hz to 7kHz (+0/-0.25dB)
- Distortion @ 1kHz: <-80 dB (0.01%)
- Dynamic Range (20kHz): 98 dB (A-weighted)
- Analog Interface Inputs
- Input Impedance: > 20 kOhm
- Input Level: + 18 dBu (max.)
- Frequency Response: 20Hz to 7kHz (+0/-0.25dB)
- Distortion @ 1kHz: <-80 dB (0.01%)
- Dynamic Range (20kHz): 90 dB (A-weighted)
- GPI Inputs
- Input Connector: D-Sub 9 female
- Number of GPI Inputs: 4
- Input Type: Optocoupler input with current limiter
- Input Voltage: 5 … 50 VDC
- Input Current: 5 mA (typ.)
- GPI Outputs
- Output Connector: D-Sub 9 male
- Number of GPI Outputs: 4
- Output Type: PhotoMOS Relay
- On Resistance: < 3 Ohm
- On Current
- 200 mA (max.) – resettable PTC fuse
- 400 mA
- Maximum Voltage: 50 VDC / 35 VAC
