NTI VGA-DVI-FOSC VGA to DVI Converter/Extender via Fiber Cable to 1,640 ft
NTI VGA-DVI-FOSC VGA to DVI Converter/Extender via Fiber Cable to 1,640 ft analog VGA into a digital DVI signal that can be extended up to 1,640 feet (500 meters) using single-strand (simplex) multimode SC fiber optic cable.
The Converter/Extender system has two components: the VGA converter/transmitter, which connects to the VGA source and also supplies video to a local VGA display, and an ST-1FODVI-R-SC500M receiver that connects to a remote DVI monitor. The units are interconnected by a single-strand multimode SC fiber optic cable.
NTI VGA-DVI-FOSC VGA to DVI Converter/Extender via Fiber Cable to 1,640 ft Features:
- Convert a video source with analog VGA signal to a digital DVI signal.
- Use with an optical receiver (ST-1FODVI-R-SC500M) to extend a remote DVI monitor 1,640 ft (500m).
- Signal transmission via a single-strand (simplex) multimode (50-micron or 62.5 micron) SC fiber optic cable - no RF interference.
- Supports resolutions to 1920x1200 (WUXGA).
Why not buy this NTI VGA-DVI-FOSC VGA to DVI Converter/Extender via Fiber Cable to 1,640 ft today?
NTI VGA-DVI-FOSC VGA to DVI Converter/Extender via Fiber Cable to 1,640 ft Specification:
- Video Input
- One female 15-pin HD connector for VGA input.
- Video Output
- One female 15-pin HD connector for VGA output.
- One female SC fiber connector for optical DVI output.
- Supports resolutions to 1920x1200.
- Power
- 100 to 240 VAC at 50 or 60 Hz via AC adapter.
- Environmental
- Operating temperature: 32 to 122 degF (0 to 50 degC).
- Storage temperature: -22 to 158 degF (-30 to 70 degC).
- Relative humidity: 0 to 85% non-condensing RH.
- Dimensions
- WxDxH in: 4.09x4.41x1.10 (104x112x28 mm)
- Regulatory Approvals
- CE, FCC, RoHS
- Warranty
- Two years
Reasons To Buy an NTI Product