NTI ST-1FODVI-L-SC DVI Splitter/Extender via Multimode Fiber Optic Cable up to 3,280 Feet
NTI ST-1FODVI-L-SC DVI Splitter/Extender via Multimode Fiber Optic Cable up to 3,280 Feet simultaneously distributes high resolution DVI video to up to four displays up to 3,280 feet (1,000 meters) from a computer using single-strand SC multimode fiber optic cable.
The VOPEX system consists of three components: the optical splitter, which connects to the transmitter and receivers; the transmitter, which connects to the host DVI video source; and a receiver for each remote DVI display. The units are interconnected by single-strand multimode SC fiber optic cable.
NTI ST-1FODVI-L-SC DVI Splitter/Extender via Multimode Fiber Optic Cable up to 3,280 Feet Features:
- Broadcast real-time DVI video to multiple display locations.
- Supports crisp and clear resolutions to 1920x1200.
- Signal transmission via single strand multimode SC fiber optic cable - no RF interference.
- Transmitter and receivers have small form factor for easy connection and placement.
- Cables can be installed in conduit prior to transmitter/receiver installation.
- EDID learning for the support of any DVI display device.
- Complies with DVI 1.0 standard.
- Ideal solution for digital signage applications.
Why not buy this NTI ST-1FODVI-L-SC DVI Splitter/Extender via Multimode Fiber Optic Cable up to 3,280 Feet today?
NTI ST-1FODVI-L-SC DVI Splitter/Extender via Multimode Fiber Optic Cable up to 3,280 Feet Specification:
Optical Splitter
Connectors- Five SC fiber connectors
- Use a FIBER-S-SCSC-50-xM (simplex multimode SC 50-micron) multimode fiber optic cable to extend the receiver from the transmitter up to 3,280 feet (1,000 meters).
- Cables not included.
- Powered from computer connected to transmitter
- WxDxH: 4.72x4.06x0.94 in (120x103x24 mm)
- Two years
Transmitter and Receivers
Video- Connectors (for transmitter and receivers): one male DVI-D single link connector and one SC fiber connector.
- Supports resolutions up to 1920x1200 (WUXGA); refer to the resolution chart below for resolutions at different lengths.
- EDID learning for the support of any DVI display device.
- Low RFI/EMI.
- Laser Class 1 Safety compliant.
- Optical source: 850 nm VCSEL.
- Supports 50/125um SC type multi-mode fiber optic cable.
- Frequency Bandwidth : 1.65Gbps (Single Link)
- Local unit: powered from attached computer.
- Remote unit: 100 to 240 VAC at 50 or 60 Hz via AC adapter. (US AC adapter included.)
- Operating temperature: 32 to 122˚F (0 to 50˚C).
- Storage temperature: -4 to 158˚F (-20 to 70˚C).
- FCC, CE
- WxDxH: 1.57x2.64x0.59 in (40x67x15 mm)
- Two Years
Data Sheet:
Reasons To Buy an NTI Product
