NTI SPLITMUX-HD-4LC Low-Cost HDMI Quad Screen Splitter/Multiviewer
NTI SPLITMUX-HD-4LC Low-Cost HDMI Quad Screen Splitter/Multiviewer allows you to simultaneously display real-time HDMI video from four different sources on a single monitor. It is capable of displaying the video sources in quad, dual, PiP or full screen mode.
NTI SPLITMUX-HD-4LC Low-Cost HDMI Quad Screen Splitter/Multiviewer Features:
- Quad, Dual, Picture in Picture, and Full Screen display modes.
- Supports HDTV resolutions to 1080p:
- HDMI features supported:
- 10-, 12-, and 16-bit xvYCC, RGB, and YCbCr.
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS, LPCM 7.1, and LPCM 2.
- Bandwidth up to 340 MHz (8 Gbps)
- Lip Sync
- HDCP compliant.
- Seamlessly scan between up to four sources at set intervals.
- Fluid, real-time video performance with 60 frames per second (fps) in all four quadrants.
- Switch audio independently of video from connected HDMI sources (e.g. source 1 and source 2 video are active while only source 3 audio is active).
- Any DVI source can be connected by using the DVI-HD-xx-MM cable (not included).
- Control the multiviewer through front panel buttons or IR remote.
- Built-in EDID table
Why not buy this NTI SPLITMUX-HD-4LC Low-Cost HDMI Quad Screen Splitter/Multiviewer today?
NTI SPLITMUX-HD-4LC Low-Cost HDMI Quad Screen Splitter/Multiviewer Specification:
Video Input- Four female HDMI connectors
- Input resolutions: 480p, 576i, 720p, 1080i, 1080p.
- Supports digital HDMI devices such as DVD/Blu-Ray players, satellite receivers and HDTV tuners.
- A DVI source can be connected by using the
DVI-HD-xx-MM cable (not included). - Supports HDCP 1.2
- One female HDMI connector.
- Output resolutions: 720p, 1080p.
- Supports HDCP 1.2
- Input: 100 to 240 VAC at 50 to 60 Hz via AC adapter. (US AC adapter included.)
- Optional universal power plug adapters available (not included).
- Output: 12 VDC, 1A
- Power consumption: 7W.
- WxDxH (in): 9.96x5.66x1.57 (253x144x40 mm)
- CE, RoHS
- TAA compliant
- Operating temperature: 14 to 158˚F (-10 to 70˚C).
- Storage temperature: -4 to 185˚F (-20 to -85˚C).
- Operating and storage relative humidity: 95% non-condensing RH.
- Use HD-xx-MM HDMI cables to connect to an HDMI source or display up to 100 feet away from the multiviewer.
- Video Input: Supports HDMI cables up to 75ft
- Video Output: Supports HDMI cables up to 100ft
- Use DVI-HD-xx-MM cables to connect a DVI or HDMI source to the multiviewer.
- Cables not included.
- Two years
- One HDMI multiviewer
- One 12V, 1A power supply
- One IR remote
- Wall mount screws
- User manual
Reasons To Buy an NTI Product