NTI SPLITMUX-HD-2RSLC Low-Cost HDMI Dual Screen Splitter/Multiviewer
NTI SPLITMUX-HD-2RSLC Low-Cost HDMI Dual Screen Splitter/Multiviewer allows you to simultaneously display real-time HDMI/DVI video from two different sources on a single monitor. It is capable of displaying the video sources in dual, PiP or full screen mode.
NTI SPLITMUX-HD-2RSLC Low-Cost HDMI Dual Screen Splitter/Multiviewer Features:
- Dual, Picture in Picture, and Full Screen display modes.
- Supported resolutions:
- Inputs: HDTV resolutions to 1080p.
- Output: 1080p, 1080i, 720p, 1024x768, 1360x768.
- Independent video in to video out resolution.
- HDMI features supported:
- Inputs: 24-, 30-, and 36-bit xvYCC, sRGB, and YCbCr.
- Outputs: 24- and 30-bit sRGB.
- Audio inputs: two-channel non-mixing stereo with PCM2, 5.1, 7.1 channels, Dolby 5.1, and DTS 5.1 audio.
- Audio output: two-channel non-mixing stereo with PCM2
- Bandwidth up to 225 MHz (6.75 Gbps).
- Inputs: 2.25 Gbps
- Output: 2.0625 Gbps
- HDCP compliant (SPLITMUX-HD-2RSLC only).
- Fluid real-time video performance with 60 frames per second (fps).
- Accepts video sources with different frame rates, and will display the images correctly.
- Switch audio independently of video from connected HDMI sources in Dual mode.
- Any DVI source or display can be connected by using the DVI-HD-xx-MM cable (not included).
- Use DVIA-HD-CNVTR-LC or DVI-HD-CNVTR DVI + Audio to HDMI Converters to pass and independently switch audio signals to the multiviewer.
- Use the front panel buttons to locally change ports, select a display mode, or change resolutions.
- Available with IR and RS232 control (SPLITMUX-HD-2RSLC only).
- Built-in default EDID table.
Why not buy this NTI SPLITMUX-HD-2RSLC Low-Cost HDMI Dual Screen Splitter/Multiviewer today?
NTI SPLITMUX-HD-2RSLC Low-Cost HDMI Dual Screen Splitter/Multiviewer Specification:
Inputs- Two female HDMI connectors.
- Supports digital HDMI devices, such as DVD/Blu-ray players, satellite receivers, and HDTV tuners.
- Supports HDTV input resolutions to 1080p
- HDCP compliant (SPLITMUX-HD-2RSLC only).
- Audio inputs: two-channel non-mixing stereo with PCM2, 5.1, 7.1 channels, Dolby 5.1, and DTS 5.1 audio.
- A DVI source can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the multiviewer.
- Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
- One female HDMI connector for local display.
- Output resolutions: 1080p, 1080i, 720p, 1024x768, 1360x768.
- Audio output: two-channel non-mixing stereo with PCM2
- A DVI display can be connected by using the DVI-HD-xx-MM cable (not included). The cable does not pass audio to the display.
- Use a video + audio to HDMI video converter to pass embedded HDMI audio into the multiviewer (see Compatible NTI Products below).
- 100 to 240 VAC at 50 or 60 Hz via AC adapter. (US AC adapters included).
- Optional universal power plug adapters available (not included).
- Power consumption: 10W.
- SPLITMUX-HD-2LC WxDxH (in): 5.51x2.76x0.98 (140x70x25 mm)
- SPLITMUX-HD-2RSLC WxDxH (in): 5.75x2.76x0.98 (146x70x25 mm)
- Operating temperature: 32 to 104˚F (0 to 40˚C).
- Storage temperature: -4 to 140˚F (-20 to 60˚C).
- Operating and storage relative humidity: 20 to 90% non-condensing RH.
- CE, FCC, RoHS
- One HDMI multiviewer
- One US power supply
- Wall mount brackets with screws
- User manual
- IR remote control (SPLITMUX-HD-2RSLC only).
- One DB9 RS232 serial male-to-female cable (SPLITMUX-HD-2RSLC only).
Reasons To Buy an NTI Product