NTI SM-16X16-C5AV-LCD VGA Video + Audio Matrix Switch via CAT5 to 600 Feet
NTI SM-16X16-C5AV-LCD VGA Video + Audio Matrix Switch via CAT5 to 600 Feet routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet between the local and remote units.
A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.
NTI SM-16X16-C5AV-LCD VGA Video + Audio Matrix Switch via CAT5 to 600 Feet Features:
- Configure and control the switch through Ethernet, serial port or front panel buttons.
- Matrix Control Software with Graphical User Interface is included.
- Supports resolutions up to 1920x1440.
- Inputs and outputs can be named.
- Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface.
- Equipped with Liquid Crystal Display (LCD) for front panel operation.
- A digital VU-meter shows the audio levels of the selected output.
- Each output provides one video signal and one stereo audio signal.
- Each input can be independently connected to any or all outputs with no image degradation.
- No loss of audio or video quality between the local and remote units.
- 1RU or 2RU rackmount case is standard.
Why not buy this NTI SM-16X16-C5AV-LCD VGA Video + Audio Matrix Switch via CAT5 to 600 Feet today?
NTI SM-16X16-C5AV-LCD VGA Video + Audio Matrix Switch via CAT5 to 600 Feet Specification:
VEEMUX SM-16X16-C5AV-LCD
- Female RJ45 input/output connectors.
- Analog bandwidth is 175 MHz.
- 10/100BaseT ethernet interface.
- Supported protocols: HTTP. HTTPS, Telnet
- RS232 interface
- Signal to noise ratio (SNR):
- Audio: >72dBA
- Video: >65dB
- Audio harmonic distortion and noise: <0.06%
- Video distortion: 70dB @ 10 MHz
- 110 or 220 VAC at 50 or 60 Hz via IEC connector.
- Power consumption: 20 W
- Add -48V5V10A2, optional internal DC-DC converter, to install the SM-16X16-C5AV-LCD in a Telecom environment.
- 58,607 hrs
- Use CAT5, CAT5e or CAT6 solid straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).
- Operating temperature: 32 to 100˚F (0 to 38˚C).
- Storage temperature: -20 to 140˚F (-30 to 60˚C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
| NTI Part # | Rack Units | Size WxDxH (in) |
|---|---|---|
| SM-16X16-C5AV-LCD | 1RU | 19x12x1.75 |
- CE, RoHS
- TAA compliant
- Two years
Local Unit (Transmitter)
Video- VGA transmitter:
- Male 15-pin HD connector for input connection.
- Female 15-pin HD connector for local monitor.
- Supports resolutions to 1920x1440.
- Signal to noise ratio: >55dB
- Distortion: 65dB at 5MHz
- Input impedance: 75 Ohms.
- Maximum input level: 1.45Vp-p.
- Supports Separate and Composite TTL level sync.
- Input Sync frequency ranges:
- Horizontal: 15 to 130 kHz.
- Vertical: 30 kHz to 150 Hz.
- Video is DC coupled.
- VGA video + audio transmitter: 3.5 mm stereo audio RCA plugs for input connection and 3.5 mm stereo audio jack for local speakers.
- Input impedance: 10k Ohms.
- Maximum input levels: 3.1Vp-p (line level).
- CD quality audio output.
- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 10 W
- Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the local unit in a Telecom environment.
| NTI Part # | MTBF (hrs) |
|---|---|
| ST-C5VA-L-600 | 84,189 |
- Operating temperature: 32 to 100˚F (0 to 38˚C).
- Storage temperature: -20 to 140˚F (-30 to 60˚C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
- CE, RoHS
- TAA compliant
- Two years
Remote Unit (Receiver)
Video- VGA receiver:
- Female 15-pin HD connector.
- Supports resolutions up to 1920x1440.
- Signal to noise ratio: >55dB
- Distortion: 65dB at 5MHz
- Video quality adjustment for different lengths of CAT5/5e/6 cable is done automatically.
- When using CAT6, some degradation may be experienced depending on the length of the cable.
- Output impedance: 75 Ohms.
- Maximum output level: 1.45Vp-p.
- VGA video + audio receiver: 3.5 mm stereo audio jack.
- Frequency response: 20 Hz to 20 kHz, ±1dB.
- Signal-to-Noise Ratio (SNR): 72 dBA.
- Total Harmonic Distortion and Noise (THD+N): 0.017%
- Stereo crosstalk: -70 dB.
- Maximum output levels: 3.1Vp-p (line level).
- Line level output: supports multimedia speakers.
- CD quality audio output.
- Require powered speakers.
- 110 or 220 VAC at 50 or 60 Hz via AC adapter.
- Power consumption: 10 W
- Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the remote unit in a Telecom environment.
- Operating temperature: 32 to 100˚F (0 to 38˚C).
- Storage temperature: -20 to 140˚F (-30 to 60˚C).
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
- CE, RoHS
- TAA compliant
- Two years
| Cable | Distance | Maximum Resolution |
|---|---|---|
| CAT5/CAT5e | 600 feet (183 meters) | 1024x768 at 60 Hz |
| 400 feet (122 meters) | 1280x1024 at 60 Hz | |
| 300 feet (91 meters) | 1600x1200 at 60 Hz | |
| 100 feet (30 meters) | 1920x1440 at 60 Hz | |
| CAT6 | 300 feet (91 meters) | 1024x768 at 60 Hz |
| 200 feet (61 meters) | 1280x1024 at 60 Hz | |
| 100 feet (30 meters) | 1920x1440 at 60 Hz |
Compatible NTI Products
- Combine NTI's extenders, switches, and converters for complex applications.
- VGA/Component Video to HDMI Converter (VGACMP-HD)
- Use with VGA Receiver ST-C5VA-R-600 to convert the video and audio output into a single HDMI signal with embedded audio.
- Requires SAM-2RCAM-xx audio cables (not included).
- Ultra Low-Cost VGA + Audio to HDMI Converter Cable (VGAA-HD-ULC)
- Requires USB power from a compatible display or PC
- VGA/Component Video to HDMI Converter (VGACMP-HD)
Reasons To Buy an NTI Product
