NTI SERIMUX-S-8 8-Port SSH Console Serial Switch with Environmental Monitoring & AC power
NTI SERIMUX-S-8 8-Port SSH Console Serial Switch with Environmental Monitoring & AC power SSH Console Serial Switch delivers secure management of up to 32 serial devices via the internet, TCP/IP network, or dial-up modem connections. It combines the advanced security of Secure Shell v2 with unlimited access to remote network management.
NTI SERIMUX-S-8 8-Port SSH Console Serial Switch with Environmental Monitoring & AC power Features:
- Operates on a hardened Linux system.
- Connect up to 32 devices with different baud rates, parity, and character length. Each switch also has one RJ45 connector for a local terminal.
- Eliminates the need to connect each device to an ASCII terminal or PC.
- Provides out-of-band access to network devices (servers, routers, network switches, and any other network devices allowing console operation using RS232).
- Connects to console serial ports using standard CAT5/5e/6 cables and cable adapters.
- Maximum cable length is 1000 feet (305 meters).
- Dual Ethernet and optional dual power provide redundant connectivity and power.
- Dual power option creates a redundant power system protecting the console switch from any power failure issues.
- USB port provides expanded logging storage, configuration export and additional functionality.
- High quality, rugged steel construction with durable powder coat finish.
- Gain access to servers without interrupting service to end-users; maintain optimal up-time.
- Monitor environmental conditions.
- Supports two sensors, including: temperature/humidity and water detection.
- When a sensor goes out of range of a configurable threshold, the system will notify you via email, LEDs, web page, and network management (SNMP).
- Power cycle without halting SUN host computer.
- No inadvertent "break" signals are generated to cause unintentional rebooting of SUN computers.
- Powerful diagnostic and event management features (data capture, notification and scripting) assist in the quick location of the source of equipment failures and minimize downtime.
- Enhanced security features to protect the system - Secure Shell (SSH v2), individual port authentication, HTTPS.
- Switching is simplified with programmable device names and menu-driven device selection.
- All configuration parameters are stored in non-volatile memory.
- Configuration parameters can be imported from USB Flash drive.
- Firmware upgradeable "in-field" through console port, Ethernet, or an attached USB Flash drive.
- 1RU case is standard. Includes rack mounting kit.
Why not buy this NTI SERIMUX-S-8 8-Port SSH Console Serial Switch with Environmental Monitoring & AC power today?
NTI SERIMUX-S-8 8-Port SSH Console Serial Switch with Environmental Monitoring & AC power Specification:
Compatibility- Supports most devices with an RS232 serial port
- Supports VT terminals
- 8/16/24/32 RJ45 EIA-232 serial port connectors
- One RJ45 EIA-232 console port connector
- Each individual serial port is fully configurable-
- All industry-standard baud rates ranging from 50 up to 115.2kbps
- RTS/CTS, Xon/Xoff or both handshaking schemes
- Variable character widths- 5, 6, 7, or 8 bits
- Stop bits - 1 or 2, as well as Parity- Odd, Even and None
- Flow Control:
- Hardware RTS/CTS
- Software XON/XOFF
- Signals: RS232 CTS, DSR, RXD, GND, DCD, TXD, DTR, RTS
- Modem control: DTR/DSR and RTS/CTS
- Data transfer rate: up to 115.2K baud between two ports
- Two ports can be at different baud rates
- Two 10/100 Base-T Ethernet ports with RJ45 Ethernet connector
- Supports both static and dynamic IP addresses
- Input Voltage: AC 100 to 240 V, 50 to 60 Hz (Country-specific power supply cable included.)
- Optional dual AC power available on all models
| Part # | Power (W) |
|---|---|
| SERIMUX-S-8 | 10 |
| SERIMUX-S-16 | 15 |
| SERIMUX-S-24 | 15 |
| SERIMUX-S-32 | 15 |
- Four cable adapters are included with the SERIMUX
- Male DB-25F to female RJ45
- Female DB-9F to female RJ45
- Female DB-25M to female RJ45
- Male DB-25M to female RJ45
- Additional adapters available
- Adapter pinout diagrams
- SSH V2, Telnet
- IPV4, IPV6
- TCP/IP, TFTP, DHCP, ICMP, UDP, ARP
- HTTP, HTTPS, SMTP, SNMP V1/V2c, Syslog, SNTP
- IPMI v2, RMCP
- Alerts are sent using email, and/or SNMP traps when any monitored environmental condition exceeds a user-specified range.
- Alerts are posted in message log, which is accessible through Web user interface.
- Sends notifications of alerts to a maximum of 17 email addresses, and/or SNMP addresses. The users can configure the schedule when they will be alerted.
- Two RJ45 modular jacks for connecting NTI temperature/humidity and liquid detection sensors.
- Available sensors
- Temperature:
- Applications from 32 to 104˚F (0 to 40˚C).
- Accurate to within ±1.35˚F (±0.75˚C).
- Fan:
- Ability to monitor internal fan speed (24- and 32-port models only)
- 32 MB Flash memory
- Female USB 2.0 Type A connector for storage devices
- System log, event-log of user activity and on-line data buffering
- Data-logging with date and time-stamp, locally
- The log can be downloaded as a tab-delimited plain text file and/or sent to an external syslog server.
- 8- and 16-port switches WxDxH (in):
- 16.20x9.00x1.75 (without supplied rack ears kit)
- 19x9.00x1.75(with supplied rack ears kit)
- 24- and 32-port switches WxDxH (in):
- 17.40x10.00x1.75 (without supplied rack ears kit)
- 19x10.00x1.75 (with supplied rack ears kit)
- CE, RoHS
- Operating temperature: 32 to 104˚F (0 to 40˚C)
- Storage temperature: -20 to 140˚F (-30 to 60˚C)
- Operating and Storage Relative Humidity: 17 to 90% non-condensing RH
| NTI Part # | Hours | NTI Part # | Hours |
|---|---|---|---|
| SERIMUX-S-8 | 43,306 | SERIMUX-S-24 | 42,980 |
| SERIMUX-S-8DP | 108,371 | SERIMUX-S-24DP | 91,754 |
| SERIMUX-S-16 | 44,783 | SERIMUX-S-32 | 42,004 |
| SERIMUX-S-16DP | 100,384 | SERIMUX-S-32DP | 87,420 |
- Two years
Reasons To Buy an NTI Product
