NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted
is a Temperature and Humidity sensor built into a large wall-mount LCD display with 2??character height for easy viewing from a distance. There are two key-hole slots on the back, 4-1/2??apart, for hanging the sensor on the wall. A template has been provided to make placement and hardware location easy. There are also two brackets (with screws) that can be mounted to the sides. These are provided for an alternate method of mounting.

NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted Features:

• Applications from -4 to 185˚F (-20 to 85˚C) and 0 to 90% relative humidity.
• High resistance to external influences on the cable due to digital output signal.
• Temperature accuracy:
• ±0.90˚F (±0.50˚C) for -4 to 14˚F (-20 to -10˚C).
• ±0.72˚F (±0.40˚C) for 14 to 185˚F (-10 to 85˚C).
• Humidity accuracy (at 86˚F/30˚C):
• 10 to 80% relative humidity, ±3%
• 80 to 90% relative humidity, ±4%
• Supports dew point measurement.
• RJ45 connector.
• Voltage Supply: 5VDC
• Current Consumption: 20mA
• Communication type: RS485
• Data rate: 96kbps
• DIN mountable
• Supports CAT5/5e/6/6a cable (24 AWG) up to 1,000 ft (305 m) (not included).
• Powered by E-2D/5D/16D.
• Compatible with E-2D/5D/16D.
• E-2D: only compatible with Rev C units (features two power inputs).
• Not compatible with E-SEMS-16(U).
• Regulatory approvals: CE, RoHS
• Compatible with E-FSC Fiber Converter/Extender.
• Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.

Why not buy this NTI E-STHSB-D Temperature/Humidity/Dew Point Sensor, DIN Mounted today?