This NTI E-PLSD Programmable LED Sensor Display data from any or all NTI ENVIROMUX? sensors configured on an E-2D/5D/16D, including cascaded units ??internal sensors, external sensors, digital inputs, output relays, IP devices, SNMP sensors, power supplies, events, and smart alerts.

NTI E-PLSD Programmable LED Sensor Display Features:

• 14-segment LED characters.
  • LED display window dimensions WxH: 7.62x3.09 in (194x79 mm)
  • Five characters for sensor value reading.
    • Character dimensions WxH: 1.09x2.02 in (28x51 mm)
  • Fourteen characters for displaying sensor name/location.
    • Customizable through the E-2D/5D/16D web interface.
    • Character dimensions WxH: 0.37x0.68 in (9x17 mm)
  • Three characters for indicating unit of measure for the sensor value being displayed.
    • Character dimensions WxH: 0.37x0.68 in (9x17 mm)
  • The LED display characters will be green when sensor status is normal, yellow when a sensor is in non-critical alert (warning), and red when in critical alert status (alarm).
• Touch-sensitive buttons.
  • Use the "SENSOR" button to manually go to the next sensor to be displayed.
    • It stops auto-scan for 30 seconds, and then resumes auto-scan.
  • "BRIGHTNESS" adjusts the LED intensity/color.
  • "MODE" switches C to F for temperature sensors.
• Configure/program the LED display using the E-2D/5D/16D web interface.
  • Drag and drop feature for user to select desired sensors to be shown on the LED display.
    • Allows user to set sensor order to be displayed.
  • User-selectable display duration for each sensor (in seconds) before it switches to the next sensor status being displayed (AKA "Scanning")
    • Default: 10 seconds
  • Enable sensors in warning/alarm status to be the only ones displayed/rotated.
    • Will rotate/scan the sensors in normal status once all sensors in warning/alarm have been cleared.
  • Sensor configuration pages feature sensor nickname field – nickname is shared with any/all LED displays.
    • Nickname supports 14 characters, that way sensor name does not scroll.
    • If no nickname is entered, the LED Display will use the description, which will scroll if longer than 14 characters.
      • User-selectable scrolling time.
        • Default: 300ms per character
• One female RJ45 port for connecting an E-TRHM-7 Temperature/Humidity Sensor
  • E-TRHM-7 Sensor can be extended up to 500 feet from E-PLSD using 24 AWG CAT5/5e/6 cable.
  • Applications from -4 to 140°F (-20 to 60°C) and 0 to 90% relative humidity.
  • Temperature accuracy:
    • ±0.90°F (±0.50°C) for -4 to 14°F (-20 to -10°C).
    • ±0.72°F (±0.40°C) for 14 to 140°F (-10 to 60°C).
  • Humidity accuracy (at 86°F/30°C):
    • 10 to 80% relative humidity, ±3%
    • 80 to 90% relative humidity, ±4%
• Compatible with E-2D/5D/16D.
  • Interfaces with the E-2D/5D/16D via the RJ45 sensor port.
    • Compatible with E-RJ8-RS485 RJ45 RS485 Sensor Port Hub
  • Supports CAT5/5e/6/6a cable (24 AWG) up to 1000 feet (305 m) (not included).
• Powered by 24VDC 1.5A external power supply (included).
  • Typical Load: 24V @ 50 to 150mA
  • Maximum Load: 24V @ 1.0A
• Communication type: RS485
• Wall mountable.
• Dimensions WxDxH: 9.96x1.08x6.72 in (253x28x170 mm).
• Operating and storage temperature: -4 to 140°F (-20 to 60°C)
• Operating/storage relative humidity: 10 to 90% non-condensing RH.
• Regulatory approvals:
  • CE, RoHS.
  • TAA compliant.
• Compatible with E-SER-2FOxMxx Fiber Converter/Extender.
  • Use to extend sensor up to 1.2 miles (2km) from the ENVIROMUX unit

Why not buy this NTI E-PLSD Programmable LED Sensor Display today?