NTI E-IPCAM-DHNPO-V2P High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera Features:

• View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
  • Control the camera using the camera web interface accessible from the ENVIROMUX web interface.
• With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert e-mails or stored locally on a connected flash drive.
  • A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)
• 1/2.8" Progressive Scan CMOS
• Video Compression: H.265/H.264/MJPEG
  • Supports three simultaneous video streams
• 2MP resolution @ 30 fps
  • Supports 1920x1080, 1280x960, 1280x720
• Night Vision IR Range: 98 feet ( 30 m)
• Lens: 4 mm (0.16 in)
• Viewing angle: 86.4˚
• Pan: 0 to 355˚
• Tilt: 0 to 75˚
• Rotate: 0 to 355˚
• Power:
  • Input: 100 to 240 VAC at 50 or 60 Hz
  • Output: 12 VDC, 1A external power adapter (included)
  • Max consumption: 5 W
  • Power over Ethernet standards supported: IEEE 802.3af
• 10/100 Mbps Ethernet port for wired connections.
• Micro SD memory card slot (up to 128 GB)
• System compatibility: ONVIF, ISAPI, SDK, Ehome
• Operating temperature: -22 to 140˚F (-30 to 60˚C).
• Dimensions WxH: 4.37x3.24" (111x82 mm)
• Waterproof rating: IP67 (camera housing only)
• Compatible with E-2D/5D/16D.
• Regulatory approvals: CE, FCC, RoHS

Why not buy this NTI E-IPCAM-DHNPO-V2P High-Definition Wired Day/Night Pan/Tilt Outdoor IP Dome Camera today?