NTI E-DI16DOR16-V22R Digital Input/Output Expander (Normally-Open Relay Contact Outputs)
The E-DI16DOR16-V22R Digital Input/Output Expander enables the connection of up to 16 additional digital sensors and output devices using just one RJ45 Sensor port on an E-2D, E-5D, or E-16D Server Environment Monitoring System (SYSTEM).The E-DI16DOR16-V22R includes digital outputs with an open-collector design for the control of up to 16 relays, solenoids, LEDs, and other devices that operate at voltages between 0-24VDC (maximum 500mA).The E-DI16DOR16-V22R includes digital outputs with a normally-open SPST relay design for the control of up to 16 different devices that operate at a maximum125VAC (0.5A maximum) or maximum 30VDC (1.0A maximum).
NTI E-DI16DOR16-V22R Digital Input/Output Expander (Normally-Open Relay Contact Outputs) Features:
- Interfaces with the SYSTEM via the RJ45 Sensor Port
- Digital inputs:
- 16 screw terminal pairs for connecting dry contact devices
- One screw terminal pair for tachometer; 0 to 255 Hz
- Accepts 26 to 16AWG wire
- Potential free
- Voltage range: 0 to +36VDC o Over-voltage surge protected
- Supports 18-24AWG CAT5/5e/6 cable up to 500 ft. (152.4 m)
Why not buy this NTI E-DI16DOR16-V22R Digital Input/Output Expander (Normally-Open Relay Contact Outputs) today?
NTI E-DI16DOR16-V22R Digital Input/Output Expander (Normally-Open Relay Contact Outputs) Specifications:
- Adds 16 digital inputs and 16 digital normally-open relay contact outputs to the E-2D/5D/16D
- Interfaces with the E-2D/5D/16D via the RJ45 Sensor Port
- Digital inputs:
- 16 screw terminal pairs for connecting dry contact devices
- One screw terminal pair for tachometer; 0 to 255 Hz
- Accepts 26 to 16AWG wire
- Potential free
- Voltage range: 0 to +36VDC
- Over-voltage surge protected
- 16 screw terminal pairs for connecting dry contact devices
- Digital outputs:
- 16 screw terminal pairs for normally-open relay contact outputs
- Accepts 26 to 16AWG wire
- Potential free
- Rated switching load: 0.5A @ 125VAC, 1A @ ±30VDC, 0.5A @ ±48VDC.
- Galvanic isolation: 1kV
- Fused
- Supports CAT5/5e/6 cable up to 500 ft. (152.4 m)
- Control via SNMP:
- Requires read-write community configuration.
- Digital inputs are fixed values (not writable) while output relays are writable.
- Locate OIDS using a MIB browser.
- Includes 5V/3A power supply.
- Current consumption: 75mA @ 5VDC
- Compatible with E-2D/5D/16D.
- Available options: desktop unit with wall mounting brackets, 1RU rackmount unit, dual side-by-side rackmount units in 1RU.
- Dimensions WxDxH:
- E-DI16DOR16-V2 (desktop): 6.49x3.15x1.75 in (165x80x44 mm)
- E-DI16DOR16-V22R (1RU rackmount) and E-DI16DOR16-V22R (1RU dual side-by-side rackmount): 19x3.15x1.75 in (486x80x44 mm)
- Regulatory approvals: RoHS
- MTBF: 650,166 hrs
- Operating temperature: 32 to 158˚F (0 to 70˚C)
- Storage temperature: -4 to 176˚F (0 to 70˚C)
- Compatible with Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Reasons To Buy an NTI Product
