NTI E-ACLM-V-V2 AC Dual Voltage Monitor
NTI E-ACLM-V-V2 AC Dual Voltage Monitor is a sensor for the E-16D/5D/2D systems (ENVIROMUX) capable of monitoring AC line input voltages and frequencies between 50~250V AC and 47~63Hz from two separate AC lines. It will report the current RMS AC Voltage and AC Frequency (Hertz) to the E-xD. The ACLM-V will also monitor the number of short term Swells1 and Sags2 as well as the number of Spikes3.
The ACLM-V utilizes two UL certified IEC 320 C14 inlets to connect to the AC lines being monitored. The ACLM-V connects to the ENVIROMUX through up to 1,000 ft of CAT5/5e/6 cable. Data is transmitted to and from the ENVIROMUX using the RS485 protocol.
NTI E-ACLM-V-V2 AC Dual Voltage Monitor Features:
- 12 bit ADC resolution, 1% full scale ADC accuracy
- Measure AC Voltage (1% @25°C accuracy) and AC Frequency (1% accuracy)
- Monitors swells, sags, and spike events
- Auto-Configured upon connection with E-xD
- RJ45 Status LED's for operating status
- User selectable data interpolation options
Why not buy this NTI E-ACLM-V-V2 AC Dual Voltage Monitor today?
NTI E-ACLM-V-V2 AC Dual Voltage Monitor Specifications:
- Reports AC Voltage and Frequency.
- Monitors AC voltage and frequency on two AC inlets between 50~250VAC and 47~63Hz.
- Monitors the number of swells, sags, and spikes.
- Voltage accuracy: ±1% FS at 32 to 104°F (0 to 40°C).
- Frequency accuracy: ± 1%
- User defined minimum and maximum voltage thresholds.
- Capable of detecting user selected spike events with a peak greater than 50V, 250V, 500V, or 1KV.
- Supports CAT5/5e/6 cable up to 1,000 ft. (305 m).
- Current consumption: 70mA @ 12VDC.
- Powered by E-2D/5D/16D.
- Regulatory approvals: CE, RoHS
- Compatible with E-FSC Fiber Converter/Extender.
- Use to extend sensor up to 1.2 miles (2 km) from the ENVIROMUX unit.
Why not buy this NTI E-ACLM-V-V2 AC Dual Voltage Monitor today?
Reasons To Buy an NTI Product
