NTI E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included

NTI E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included monitors critical environmental conditions (such as temperature, humidity, and water leakage) that could destroy network components in your server room. When a sensor goes out of range of a configurable threshold, the system will notify you via email, SNMP traps, web-page alerts, a visual indicator (red LED), voice phone calls (via Automatic Voice Dialer System), and SMS messages (via USB 3G modem).

The system supports two external configurable sensors, five digital input sensors, and one output relay for control of external devices.

NTI E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included Features:

Name: NTI E-2D-D Small Enterprise Environment Monitoring System
Brand: NTI
SKU: E-2D-D
Price: 470 USD
Availability: InStock
Rating: 5 (5756 reviews)

Monitor and manage server room environmental conditions over IP.
Sensors supported:
- 2 external configurable sensors
- 5 digital inputs sensitive to contact closure
- 8 Remote Temperature/Humidity Sensors over IP
  - E-MICRO-T: 1 integrated temperature sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, dual DC power (dual redundancy).
  - E-MICRO-TRHP: 1 integrated temperature/humidity combination sensor, 2 RJ45 ports for external temperature/humidity sensors, 2 digital inputs sensitive to contact closure, built-in Power over Ethernet (POE), dual DC power (triple redundancy).
- 4 Remote 1-Wire Sensors over IP
  - E-1W(P): two RJ11 connectors for daisy-chaining many 1-wire temperature/humidity/dew point, thermocouple, or digital input expanders in any combination (up to 24 single-reading 1-wire sensors); two digital inputs sensitive to contact closure; dual DC power; optional Power over Ethernet (POE).
One output relay for control of external devices.
- Relay activates upon alarm or via the user interface.
- Control output relays via SNMP SET commands to power on/off external devices.
Supports IP network video cameras for live view of any facility.
- One integrated view - see different Web cameras side-by-side with physical and environmental parameters.
- Any programmed event can trigger a snapshot from an IP camera.
Monitor (ping) up to 64 IP network devices.
- Alerts are sent if devices are not responding.
Linux inside.

Why not buy this NTI E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included today?

NTI E-2D-D Small Enterprise Environment Monitoring System, DIN Mount Kit Included

RJ45 Sensor Ports

Two female RJ45 jacks for connecting NTI temperature, humidity, liquid detection, smoke detection, glass break, vibration, motion sensors, and more.
Two levels of user-defined alerts - non-critical and critical.
Provides +12 VDC, 100 mA for each port.

Dry Contact Closures

Five screw terminal pairs for connecting dry contact devices and the liquid detection sensor.
Potential-free.
Output voltage: +5 V DC
Current limited to 10 mA
Maximum resistance to close contact: 300K Ohm

Output Relay

One screw terminal pair.
Potential-free relay switch contacts.
Normally open / normally closed connection points.
Maximum switching load: 0.5A at 125VAC, 1A at 30VDC, 0.5A at 48VDC.

USB Ports

Two female USB Type A connectors for connecting USB modem or for downloading log data to USB flash drive.
One female USB Type B connector for connecting a PC for serial terminal access.

Ethernet Port

One female RJ45 connector.
10/100 Base-T Ethernet interface - Supports full- and half-duplex.

Power Output

AUX Power

One screw terminal pair.
Provides +12 VDC, 500 mA.

Optional Back-Up Battery

Rechargeable sealed lithium battery.
Provides back-up for two hours.

MTBF

E-2D-D: 229,580 hours.
E-2D-DB: 230,693 hours.

Protocols

HTTP/HTTPS, SNMP V1/V2c/V3, SMTP, TCP/IP, Syslog, SNTP, DHCP, SSHv2, SSLv3, TLS v1.2, LDAPv3, XOAUTH2, AES 256-bit, 3DES, Blowfish, RSA, EDH-RSA, Arcfour, IPV6, WAP 2.0, RADIUS

Support for XOAUTH2 provides higher security authentication for email accounts (e.g. Gmail).

Compatible with any SNMP management software.

The unit can be polled via SNMP.

Operates and configures via HTTP/HTTPS web page, Telnet, SSH, or USB serial interface.
An IP address can be assigned to the E-2D-D automatically by a DHCP server.
Generates SNMP traps, email alerts, syslog messages, and SMS messages (via USB 3G modem).

Alerts are posted in event log, which is accessible through Web user interface.
Email alerts can be sent to 17 addresses.

Dimensions

WxDxH: 5.82x3x1.75 in (148x76x44 mm)
Optional 1RU rackmount kit available (E-RK1-2D).

The ENVIROMUX system can be mounted so that the sensor connectors are facing the front or back of the rack.

Weight : E-2D-D: 1.0 lb (0.45 kg)
Power

Dual DC power.

If the first power source fails, the unit will automatically, without interruption, switch over to the second power source before switching to the optional battery backup.