MuxLab 500757-RX HDMI over IP H.264 PoE Receiver
The HDMI over IP H.264 PoE Extender Kit allows HDMI source and display equipment to be connected in point-to-point, point-to-multipoint and multipoint-to-multipoint configurations via a local Ethernet network, in a flexible, expandable and cost effective manner, without the need to install dedicated cabling systems. Connectivity may be up to 330ft (100m) @ 1080p via Cat5e/6 UTP cable, and the device supports PoE (PD) if used with a PoE (PSE) Ethernet Switch.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 833-WOLFPACK (833-965-3722) right now to discuss your needs.
MuxLab 500757-RX HDMI over IP H.264 PoE Receiver Features:
- Supports HDMI up to 1080p resolution @ 30Hz
- Supports 100's of Transmitters & Receivers depending on network bandwidth
- H.264 compression supports high image quality
- High compression rate suitable for WiFi transmission
- Extend HDMI up to 330ft (100m) over Cat5e/6
- Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
- Supports RS232 and IR transmission for remote control
- PoE powered
Why not buy this MuxLab 500757-RX HDMI over IP H.264 PoE Receiver today?
MuxLab 500757-RX HDMI over IP H.264 PoE Receiver
- Environment: HDMI (up to 1080p @ 30Hz)
- Devices: DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
- Control: Controllable via the Ethernet port.
- HDMI standard: HDMI ver. 1.3, HDCP 1.1
- Connectors
- One (1) HDMI receptacle for audio/video.
- One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
- One (1) DB9 for Serial Port for RS232.
- One (1) 3.5mm jack for IR emitter/sensor.
- Six (6) DIP Switches for device ID addressing.
- Maximum Distance
- On HDMI (per side): 6.6ft (2m)
- On Cat5e/6: 330ft (100m)
- Latency: 500ms(max), 300ms (typical)
- Compression
- Video: H.264 fully compliant with ISO/IEC 14496-10 high profile and level 4.1, up to 1920x1080p @ 30Hz
- Audio: MPEG
- Network Requirement: Compliant with the full IEEE 802.3-2002 specifications (100BaseTX).
- Network Bandwidth
- Video: 18Mbps
- Audio: 256Kbps
- IR Frequency: 38KHz to 56KHz
- RJ45 Pin Configuration
- RJ45 Link
- Pin 1 (R)
- Pin 2 (T)
- Pin 3 (R)
- Pin 6 (T)
- Pin 4 (R)
- Pin 5 (T)
- Pin 7 (R)
- Pin 8 (T)
- Power Source: This device supports PoE (PD), an external power supply is not included. It is intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional power supply (500993) may be purchased separately
- PoE Standard: IEEE 802.3af
- Power Consumption: Receiver: 2.5W
- Temperature
- Operating: 0˚ to 40˚C
- Storage: -20˚ to 85˚C
- Humidity: Up to 95% non-condensing
- Enclosure Type: Metal enclosure
- Dimensions: 4.4" x 4.6" x 1.0" (111mm x 120mm x 25mm)
- Weight: 1.5lbs(0.7kg)
- Compliance
- Regulatory: FCC, CE, RoHS
- Flammability: 94V0
