HDTV Supplys WolfPack POE HDMI Over IP Matrix Switcher sends & receives an HDMI video/audio signal up to 450 feet in a 1080p HDMI format using CAT6 cables.
Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs or any combination.
These WolfPack HDMI Over IP Matrix Switchers use H.265 technology with the WolfPack POE Transmitters (TX or Encoders) and POE Receivers (RX or Decoders) to provide a complete end-to-end streaming matrix system.
They can also provide a video wall up with input and output HDMI resolutions supporting up to 1920x1080@60Hz.
This system supports Windows software, Android and iOS tablet APPs and UDP commands control, as well as supports a control UI customization.
Features That Separate Our WolfPack HDMI Over IP Matrix Switchers from the Competition:
- Wireless Real Time Video Preview: See the video on a tablet what is showing sources with its iPad App
- POE design
- Supports bi-directional IR
- Supports USB for a keyboard and mouse
- Any in, to any out, in any combination
- No server or control box needed in the system
- Includes Drag-N-Drop Video Wall Processing
- Supports resolution down/up scaling
- Support the RTSP IP camera decoding
- Consists of POE HDMI Transmitters, POE HDMI Receivers & a POE Ethernet Switch
- Add, remove & relocate sources & TVs at anytime
- Free Android and iOS Apps
- Supports Windows PC Control Software
- POE design so it doesn't require AC adapters
- Automatically sets the IP address
- Extends the signal 450' in & out of the Ethernet switch with CAT6/7
- Supports H.265 protocol for the best picture
- HDCP 1.4 compliant
- 1080p HDMI video over a 1G Switch
- Supports resolutions up to 1920x1080p
- No (80ms) Latency
- Fast 80 ms Switching Time
- Supports embedded and de-embedded audio
- Field Upgradeable
Wireless iPad Real Time Video Preview Of Every Source Device: Along with the other major features like POE, separate audio and creating video walls, a key feature is our Wireless iPad Real Time Video Preview. That means if you build your own matrix and pick the optional wireless iPad control your iPad will show in real time the videos that are on all of them. If you have 12-DirecTV receivers all set to different channels you'll see 12-different real-time videos, not pictures, real-time video.
If it is a DVD playing, you'll see that real time video also. This wireless iPad real time video preview sets us apart from others who makes you run to the TVs to see what's playing. Only at HDTV Supply can you get this feature.
The HDMI Receiver Over IP allows you to simultaneously support an HDMI 1.4 Signal (including 1080p video with 5.1 audio) to one or more HDMI video projectors or LCD Panels using one CAT6/7 cable over a standard Ethernet infrastructure.
Internal Video Wall Processor: Not only is this product an HDMI matrix switch it is specifically designed to support the video wall configurations below. Your tablet is used to create video walls.
The local and remote units can be connected for a point-to-point connection, or through VLAN isolation on a managed network switch for a multipoint-to-multipoint configuration. It supports Drag-N-Drop Video Wall Processing.
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
...and all easily created by your own iPad!
Fast 80ms Seamless HDMI Switching: These HDMI Over IP Matrix Switchers deliver instantaneous video switching with full 1080p/60 video at each port.
Separate Embedded Audio In and De-embedded Audio Out: These HDMI over IP Matrix Switchers allow you to display video with separate audio coming from another audio source as it supports embedding the audio on the HDMI TXs connector and then de-embedding the audio on the HDMI RXs connector.
EXAMPLE: Build a WolfPack 1080p 12x30 HDMI Over IP Matrix System with Video Wall, Real Time Video Preview, Fast Switching & Separate Audio:
- 12 - 1080p POE HDMI to IP Transmitters extending to 450 feet
- 30 - 1080p POE HDMI to IP Receivers extending to 450 feet
- 1 - 19" POE Rack mount
- 48-Port 1G IGMP Ethernet switch
- All the above are POE so no AC Adapters are needed
- 1 - WiFi Router & Ethernet switch (non-POE)
Why not buy a 1080p WolfPack™ HDMI Over IP Matrix System today?
HDMI TX or HDMI RX Over IP Specs:
- Resolutions Supported:
- 640 x 480@60Hz
- 480p@60Hz,
- 576P@50Hz,
- 800 x 600@60Hz,
- 1024 x 768@60Hz,
- 720p@50Hz, 720p@60Hz,
- 1280 x 800@60Hz,
- 1280 x 1024@60Hz,
- 1366 x 768@60Hz,
- 1400 x 1050@60Hz,
- 1440 x 900@60Hz,
- 1680 x 1050@60Hz,
- 1920 x 540@60Hz,
- 1080p@24Hz,
- 1080p@25Hz,
- 1080p@30Hz,
- 1080p@50Hz, 1080p@60Hz
- HDMI 1.4, HDCP 1.4
- USB & HDMI connectors on both TX & RX
- No need to do the IP settings, plug and play
- Supports to rename the sources and displays
- EDID preset and learning
- Low 80ms latency 5
- Video Wall mode and matrix switch both modes
- Supports iPad APP control with preview function
HDMI TX or RX Over IP Specs:
- Input TMDS signal: 1.2 volts (peak-to-peak)
- Input DDC signal: 5 volts (peak-to-peak)
- HDMI Connector: 19 pin type female connectors
- RJ-45 Connector
- USB Connector
Why not buy a WolfPack™ HDMI Over IP Matrix System today?
Why not buy a WolfPack™ HDMI Over IP Matrix System today?
Why not buy a WolfPack™ HDMI Over IP Matrix System today?
DirecTV Controller
Q: Does the transmitter have an audio out?
A: Yes, the transmitter and receiver both have the 3-pin audio output.
Q: How do you test before you ship my system?
A: We put the products in the heating room for 12-hours for aging and have all the products turned On and the temperature of the heating Room set to 140 degrees. If anything fails we replace the failed unit and start the test over again.
Q: Is it a picture of a screen or full-motion video?
A: The preview of both sources and the Video wall is with full-motion video.
Q: Is there audio with the iPad Preview screen?
A: No, the preview on the iPad will not have the audio function.
Q: Can there be more than one showing?
A: For the source preview, it can be showing all the sources. The TV/Video Wall will be only showing the one we selected.
Q: Is it a source only?
A: This preview is for both input sources, and the selected TV or video wall
Q: Can it be at TV at the destination?
A: Do you mean to have this preview function on the TV? If so, it's not able to do it, as the preview function is only available on the iPad APP. Unless we wirelessly share/mirror the iPad to the Apple TV by airplay.
Q: Can there be text written below the picture or video?
A: We can add the OSD picture on any position of the TV. I am working on a demo video of this, but this will need to use the PC control software to add.
Q: If it is a satellite receiver can you change the channel?
A: No, we will only be able to preview the contents, but not able to change the channels
Q: If a DVD is playing do you see a picture?
A: Yes, we will see exactly the same contents as the DVD plays.
Can the Ethernet switches be cascaded and still act as a matrix?
A: Yes. The network switches can be cascaded and still act as a large matrix.
Q: Is it a WEB GUI control or PC software
A: It is a PC control software-based system for the configurations like CEC settings, resolution, image rotating, etc . It also has an optional iPad app and does not have a web GUI.
Q: How do you setup the video wall?
A: For the video wall set up, it can done it in seconds using the iPad app.
Q: How do you change the IP and MAC address of the transmitters and receivers?
A: You can set up the IP and MAC on the iPad app or PC control software, but we recommend using the automatic IP and MAC address, so it can support plug and play.
Q: The Transmitters and Receivers both have Audio out on the receiver can the audio be matrixed such as Receiver A sends audio out to Receiver B, if using the audio out?
A: The audio out on both the RX and TX are the corresponding audio with the video so its audio function is only an extract function from the video and is not able to do as an audio matrix.
- LAN1 (AV/POE): To connect with the network switch use the PC control software to control this system
- LAN2 (C): To connect with the network switch this is used for a 3rd party to use the IP control this system
Q: What is the distance with POE in and out?
A: With the POE, the input can up to 450 feet at 1080p@60Hz and the output
Q: What type of UTP cable do you recommend?
A: As it's using for the video signal transmission we recommend using the STP 868B cable
Q: Can you use CAT6 - 5E - 6 and 7 and is there a difference in length of cables?
A: We did the tests here with the CAT6/CAT6/Cat6/Cat7 cable and the CAT6 and CAT7 are the best and can reach a distance of 450 feet with POE
Q: Please give us an explanation of when the large and small streaming resolutions would be used?
A: The highest resolution can up to 1080p@60Hz, the lowest resolution is 680x480@60Hz but that resolution can't support the IP camera decoding
What does the PC Configurator do?
A: The PC control software is mainly for the resolutions, RS232, image adjustment and RX/TX IP settings
Q: Does the iPad control require a wireless router?
A: Yes, it will need a WIFI router connected in the same system
Q: In the diagram in the manual it shows the IP control box with only an Internet connection, does a PC plug into it?
A: Yes, the control PC uses a LAN cable connected to the same network switch
Q: You also recommend Managed POE switches, correct?
A: We tested on several POE network switches and so far both of the managed POE or the non-managed POE network are working well. But the managed network switch is more stable and it's fanless which is quieter.
Why not buy a WolfPack™ HDMI Over IP Matrix System today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT, and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
