FC−18 is a display ON/OFF controller for 4K@60Hz (4:4:4) HDR HDMI signals. It accepts and outputs an HDMI signal after reclocking and equalizing. On detection of the onset of an input signal FC−18 sends an ON command to the display or projector and on detection of the loss of the input signal FC−18 sends an OFF command. FC−18 can also be used to control a display device manually via front panel buttons, Ethernet or contact closure switches.

Kramer FC-18 - 4K HDR Display ON/OFF Controller Features:

Save on Power Costs — Shut down display devices automatically when not in use.
Facilitate Meeting Setups — Just plug in the AV source and the display screen or projector automatically turn on. No more searching for the power button.
High–Performance HDMI Acceptor — Supports 4K@60Hz (4:4:4) HDR10, HDCP 2.2/1.4 signals at 18G (6G per channel) data rate, CEC (by–pass), Dolby Vision (by–pass) as specified in HDMI 2.0
Variety of Automatic Control Formats — Commands are sent to the display device via CEC, RS–232, or Ethernet.
Variety of Manual Control Formats — Manually turn the display device ON and OFF via front panel button and RS–232/CEC commands, Ethernet, contact closure switches.
Data Tunneling — Supports data tunneling between the RS–232 port and the Ethernet ports.
HDCP Compliance — HDCP 1.4 and 2.2.
Kramer Equalization & re–Klocking™ Technology — Rebuilds the digital signal integrity to travel longer distances.
Selectable EDID Options — Default (internal), external (sink) or user–defined.
Firmware Upgrading via USB port.
Easy Installation — Compact DigiTOOLS® fan–less enclosure for surface mounting or side–by–side mounting of 3 units in a 1U rack space with the recommended rack adapter.

Kramer FC-18 - 4K HDR Display ON/OFF Controller Specifications:

DESCRIPTION: 2-way open-back ceiling speakers
HIGH FREQUENCY DRIVER: 0.5" Mylar dome tweeter
LOW FREQUENCY DRIVER: 6.5" polypropylene cone with rubber surround woofer
IMPEDANCE: 8Ω
DISPERSION COVERAGE: 120˚ @2kHz
CROSSOVER FREQUENCY: 3kHz
NOMINAL SENSITIVITY: 87dB SPL @1m, 1W
COVERAGE ANGLE: 104˚
DIRECTIVITY FACTOR (Q): 8.5 (averaged 100Hz to 10kHz)
DIRECTIVITY INDEX (DI): 9.2dB (averaged 100Hz to 10kHz)
FREQUENCY RESPONSE: 60Hz to 20kHz
INPUT POWER: 30W RMS, 80W continuous program
TRANSFORMER
70V - 3.7W/7.5W/15W/30W
100V - 7.5W/15W/30W
RECOMMENDED AMPLIFIER POWER: 0W
INPUT CONNECTOR: Spring-type push terminal block
WEIGHT PER SINGLE SPEAKER: 1.55kg (3.41lbs) approx
SHIPPING WEIGHT (FOR PAIR): 4.05kg (8.91lbs) approx
DIMENSIONS (OD): 23cm (9.06")
CUTOUT DIAMETER: 19.5cm (7.68")
MOUNT DEPTH: 7.5cm (2.95")
OPTIONAL: SKIC-6 installation bracket
PRODUCT DIMENSIONS: 12.00cm x 7.15cm x 2.44cm (4.72" x 2.81" x 0.96" ) W, D, H
PRODUCT WEIGHT:0.3kg (0.6lbs) approx.
SHIPPING DIMENSIONS: 49.00cm x 18.60cm x 58.80cm (19.29" x 7.32" x 23.15" ) W, D, H
SHIPPING WEIGHT: 0.8kg (1.8lbs) approx.