Kramer 4-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio is a 4-channel 4K60 4:2:0 HDMI, analog audio, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair receiver card for the VS-3232 Series Modular Multi-Format Digital Matrix Switchers. The DTAxr-IN4-F32 inputs four extended reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, Ethernet, and IR from the line to the chassis.
Kramer DTAXR-IN4-F32 4-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio Features:
- Max. Data Rate - 10.2Gbps (3.4Gbps per graphics channel).
- Max. Resolution - 4K@60Hz (4:2:0).
- Analog Audio Embedding/De-embedding - On the same jack
- HDBaseT Technology - HDTV compatible, HDCP compliant.
- System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp).;Note: When using Kramer HDBaseT cables.
- Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
- Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
- 3D Pass-Through.
Why not buy this Kramer DTAXR-IN4-F32 4-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio today?
Kramer DTAXR-IN4-F32 4-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio Specification:
- INPUTS
- 4 HDBaseT TP on RJ-45 connectors
- 4 Unbalanced audio on a 16 pin terminal block
- PORTS
- 4 RS-232 and 4 IR on 10 pin terminal blocks for bidirectional RS-232 and IR extension
- 1 Ethernet on an RJ-45 connector for bidirectional Ethernet extension
- BANDWIDTH PER CHANNEL
- Video: 3.4Gbps
- Serial data: 115200
- TOTAL BANDWIDTH
- Video: 10.2Gbps
- Serial data: 115200
- MAXIMUM RANGE
- Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
- Note: When using Kramer HDBaseT cables
- 3D PASS THROUGH: Supported
- EXTENDED ETHERNET: Up to 100Mbps extended line rate bandwidth
- EXTENDED RS-232: 300 to 115200 baud rate
- POWER CONSUMPTION: 34W
- OPERATING TEMPERATURE: 0˚ to +40˚C (32˚ to 104˚F)
- STORAGE TEMPERATURE: -40˚ to +70˚C (-40˚ to 158˚F)
- HUMIDITY: 10% to 90%, RHL non-condensing
- STANDARD COMPLIANCE: HDCP 1.4, HDMI 1.3a, HDBaseT
- SAFETY REGULATORY COMPLIANCE: CE
- ENVIRONMENTAL REGULATORY COMPLIANCE: Complies with appropriate requirements of RoHs and WEEE
- PRODUCT DIMENSION: 22.00cm x 18.80cm x 2.00cm (8.66" x 7.40" x 0.79" ) W, D, H
- PRODUCT WEIGHT: 0.5kg (1.1lbs) approx.
- SHIPPING DIMENSION: 25.00cm x 22.50cm x 5.50cm (9.84" x 8.86" x 2.17" ) W, D, H
- SHIPPING WEIGHT: 0.7kg (1.5lbs) approx.
Why not buy this kramer DTAXR-IN4-F32 4-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio today?
Kramer DTAXR-IN4-F32 DataSheet
Kramer DTAXR-IN4-F32 Installation Sheet
