Kramer DTAXR-IN2-F16 2-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio is a 2-channel 4K60 4:2:0 HDMI, analog audio, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair receiver card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers. DTAxr-IN2-F16 inputs two extended reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, Ethernet, and IR from the line to the chassis.
Kramer DTAXR-IN2-F16 2-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio Features:
- Max. Data Rate - 10.2Gbps (3.4Gbps per graphics channel).
- Max. Resolution - 4K@60Hz (4:2:0).
- Analog Audio Embedding/De-embedding - On the same jack
- HDBaseT Technology - HDTV compatible, HDCP compliant.
- System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
- Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
- Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.
- Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
- 3D Pass-Through.
Why not buy this Kramer DTAXR-IN2-F16 2-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio today?
Kramer DTAXR-IN2-F16 2-Channel 4K60 4:2:0 HDMI over Extended Reach HDBaseT Input Card with Selectable Embedded or De-embedded Analog Audio Specifications:
- INPUTS
- 2 HDBaseT TP on RJ-45 connectors
- 2 Unbalanced audio on a 16 pin terminal block
- Ports
- 2 RS-232 and 2 IR on a 10 pin terminal block for bidirectional RS-232 and IR extension
- 1 Ethernet on an RJ-45 connector for bidirectional Ethernet extension
- BANDWIDTH PER CHANNEL
- Video: 3.4Gbps
- Serial data: 115200
- TOTAL BANDWIDTH
- Video: 10.2Gbps
- Serial data: 115200
- MAXIMUM RANGE
- Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
- Note: When using Kramer HDBaseT cables
- 3D PASS THROUGH: Supported
- Extended Ethernet: Up to 100Mbps extended line rate bandwidth
- Extended RS-232: 300 to 115200 baud rate
- POWER CONSUMPTION: 17W
- OPERATING TEMPERATURE: 0˚ to +40˚C (32˚ to 104˚F)
- STORAGE TEMPERATURE: -40˚ to +70˚C (-40˚ to 158˚F)
- HUMIDITY: 10% to 90%, RHL non-condensing
- STANDARD COMPLIANCE: HDCP 1.4, HDMI 1.3a, HDBaseT
- SAFETY REGULATORY COMPLIANCE: CE
- ENVIRONMENTAL REGULATORY COMPLIANCE: Complies with appropriate requirements of RoHs and WEEE
- Product Dimension: 19.00cm x 13.00cm x 2.00cm (7.48" x 5.12" x 0.79" ) W, D, H
- Product Weight: 0.3kg (0.6lbs) approx.
- Shipping Dimension: 24.20cm x 16.80cm x 6.00cm (9.53" x 6.61" x 2.36" ) W, D, H
- Shipping Weight: 0.4kg (0.8lbs) approx.
