This Kiloview KVW-U40 HDMI to NDI Converter is a disk like device, just over 3" in diameter and 1" tall, that packs quite a few features to simplify working with NDI|HX network. At that size, it's small enough to mount on your camera, using the included mounting shoe adapter, and it features an HDMI 2.0 input supporting 4K60p signals and converting them for connection to an NDI|HX network. The U40 also features two Ethernet ports which allow you to convert input IP streams into NDI|HX on your network.

The U40 supports PTZ control protocols, allowing you to use it to control your non-NDI|HX PTZ camera from your NDI|HX network, and you can also utilize the USB port for PTZ control via RS-232, RS-422, RS-485. A built-in tally light comes in handy to identify which camera you are controlling. It supports PoE power and has a handy power out feature, allowing you to power a camera or monitor.

Kiloview KVW-U40 HDMI to NDI Converter Features:

• Convert 4Kp60 HDMI to NDI
• Support 3.5mm analog audio embedded in NDI
• It also supports voice intercom based on optional Kiloview Intercom software
• PoE with DC out, allowing you to power the U40, and at the same time, power other devices such as monitors, recorders, or cameras
• Supports PTZ control USB to serial RS232/485/422
• Supports Sony Visca / Visca (Laia) / Visca (Kato) / PELCO-D/PELCO-P protocols
• USB video to NDI (future feature)
• Convert IP streams such as RTSP/RTMP/SRT/TS-UDP/HLS to NDI|HX/SRT/RTSP/RTMP/TS-UDP

Why not buy this Kiloview KVW-U40 HDMI to NDI Converter today?