This Key Digital KD-IP922ENC-II 4K AV over IP System Encoder is a wireless HDMI extender kit with support for resolutions up to 4K. The innovative technology behind KD-IP922ENC-II reliably extends HDMI signals with the latest standards - up to 3840x2160 resolution, HDR, 4:4:4 chroma, and deep color – for an effortless solution ideal for temporary and permanent installation in presentation spaces, outdoor AV setups, and all environments where running a new wire is not possible.

Key Digital KD-IP922ENC-II 4K AV over IP System Encoder Features:

• Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4) out of network switch or point-to-point
• AV Over IP: Utilizes a managed gigabit network switch to enable HDMI video distribution, matrix switching, and signal extension
• Video Wall Processing: Encoder + Decoder systems create video walls with up to 16x16, 256 total maximum displays
• Key Digital App Ready: 3 multi-function ports may be used as Compass Control® Pro master controller, by IP control systems via KeyCode open API, or as a third-party control interface
• KDMS Pro Ready: PC software for unit & system setup and control UI with clean End-User mode option including optional image preview, mouse-drag video wall management, source and display control of popular devices via IR and PJ Link
• HDMI Pass-through: Tx unit HDMI Pass-through to connect local monitor, HDMI Audio systems
• Audio De-Embedding: Audio from the HDMI input is de-embedded through Analog phoenix terminal to enable external audio connectivity with audio systems and amplifiers
• Audio Pre-Amp: Volume, muting, 3-band EQ, and lip-sync delay controllable on audio de-embed port
• USB 2.0: Routing follows AV source / display selection with maximum of 4 USB keyboard or mouse devices simultaneously routed to a single host computer / encoder. 1.5Mbps maximum bandwidth. Webcams not supported. For non-keyboard & mouse device inquires, please contact Technical Support before purchase
• 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit (10.2Gbps max bandwidth)
• 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
• Signal Extension: Up to 330 ft. / 100 m @ 4K 24/25/30(4:4:4) into network switch or or point-to-point
• Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
• Redundant Power Connection: Added reliability for non-PoE integration
• HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
• Data Stream Bandwidth: ≤ 850Mbps at 4K, ≤ 250Mbps at 1080K, ≤ 125Mbps at 720p / 1080i
• Latency: <40ms at 4K. Less at lower resolution
• Installation: Use KD-SMS16 to cleanly install up to twelve ENC/DEC units in rack
• RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
• Surround Audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
• Control System Support: Controllable by all IR, RS-232 & TCP/IP supported control systems via open API

Why not buy this Key Digital KD-IP922ENC-II 4K AV over IP System Encoder today?