The KanexPro HDSC31D-4K 3-Input DisplayPort, HDMI & VGA Collaboration Switcher Scaler over HDBaseT comes designed to let you send DisplayPort, HDMI, or VGA signals via a shielded CATx cable to an HDBaseT at a distance up to 230 feet. This three input device supports resolutions up to 4K/30Hz. It consists of a sender and a receiver unit for allowing you to switch between the sources and requires only one power supply source. The HDSC31D-4K presents a simplified and dependable solution for switching and transmission of DisplayPort, HDMI, and analog video signals. This HDCP compliant unit is controlled through RS-232 and IR remote.
The KanexPro HDSC31D-4K 3-Input DisplayPort, HDMI & VGA Collaboration Switcher Scaler over HDBaseT finds great application in boardrooms or smart classrooms, lecterns, beneath tables in conference rooms, thanks to its low profile design and remote power (POE) capability.
KanexPro HDSC31D-4K 3-Input DisplayPort, HDMI & VGA Collaboration Switcher Scaler over HDBaseT Features:
- Compact & slim design for flexible installation
- Extends 3-inputs via HDBaseT up to 230 feet (70 m)
- Send 4K UHD - 24/30Hz signals up to 115 feet (35 meters)
- Supports CEC & HDCP 2.2 compliant
- Built-in EDID management
- VGA video also supports: C-video & YPbPr
- Controllable via IR, front-panel, & RS-232
- Supported resolutions:
- 40 meters: 1080p @60Hz@48bit; 1080p@120Hz@24bit
- 70 meters: 1080p@60Hz@36bit; 3D1080p@30Hz36bit
- 3D, 1080p@60Hz@36bit; 4K x 2K@30Hz@24bit
- Bi-directional POE support (Tx to Rx or Rx to Tx)
- International power supply
- Locking power supplies
- Includes mounting kits
Why not buy this KanexPro HDSC31D-4K 3-Input DisplayPort, HDMI & VGA Collaboration Switcher Scaler over HDBaseT today?
KanexPro HDSC31D-4K 3-Input DisplayPort, HDMI & VGA Collaboration Switcher Scaler over HDBaseT Specifications:
- Video Input
- Input
- 1 HDMI
- 1 VGA, 1 HDBaseT in
- Input Connector
- 4 female HDMI
- 2 female VGA (15 pin)
- Video Signal: DP/HDMI/VGA
- Video Output
- Output
- 1 HDMI
- 1 HDBaseT out
- Output Connector: 1 female HDMI
- Video Signal: 1 HDMI Video
- IR Input
- Input: 1 IR IN
- Input Connector: 3.5mm mini jack
- IR Output
- Output: 1 IR OUT
- Output Connector: 3.5mm mini jack
- Video General
- Resolution: range
- HDMI: up to 4K/30Hz
- VGA: 1024x768, 1280x720, 1280x800, 1920x1080, 1600x1200, 1920x1200
- Bandwidth
- HDMI: 10.2 Gbps
- Maximum Pixel Clock: 165MHz
- Output: 75 Ohms
- Gain: 0dB
- Input/Output Level: 0.5V~2.0Vp-p
- HDMI & HDCP Standards: Compliant with DVI & HDMI 1.4 standards, HDCP 2.2
- Audio Input
- Input HDMI / DP audio
- Input Connector: HDMI, DP
- Input Impedance: > 10kO
- Audio output
- Output: HDMI via HDMI audio
- Output Connector: HDMI
- Output Impedance: 10KO
- Audio General
- Frequency Response: 20Hz~20K Hz
- Stereo Channel Separation: > 80dB @1KHz
- CMRR
- > 90dB @20Hz to 20K Hz
- Audio Format: HDMI embedded audio: PCM, Dolby DTS
- Control Parts
- Control / Remote: IR remote, buttons & RS232 - Phoenix connectors
- Pin Configuration: 2=TX, 3=RX, 5=GND
- General
- Temperature: 0~45 C
- Power Supply: DC 5V,3A
- Power Consumption: 3.8 Watts max
- Case Dimension: W347mm x H28mm x D110mm
- Product Weight: 0.63 Kg
HDTV Supply includes a 3 Year Limited Warranty on all Kanex Pro products. The warranty states that (a) its products (the will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 3 years. In order to get a warranty replacement for a defective item, HDTV Supplys and Kanex Pros Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 5 Year Extended U.S. Warranty for this Long-Runner HDMI 100M Extender. Please go to Extended Warranties or see the above Options to purchase it.
