This JVC DT-V17G2Z 16.5-Inch Multi-Format Broadcast Field/Studio LCD Production Monitor is equipped with an In-Plane Switching (IPS) panel, which surpasses the EBU Class 2 requirements in terms of color space, gamma and gradation. It also offers a contrast ratio of 1500:1, wide gamut, and wide viewing angles of 178°/178°
Analog-based Picture-quality Evaluation Technology plus Contour Enhancer Technology to help eliminate digital aliasing to make pictures look more natural.
JVC DT-V17G2Z 16.5-Inch Multi-Format Broadcast Field/Studio LCD Production Monitor Features:
- 17-inch class (16.5-inch viewable) IPS panel with 16.7 million color reproduction
- High 1500:1 Contrast Ratio
- Full HD resolution: 1920 x 1080 pixels
- Fully capable of displaying 2048 x 1080/24p (DCI 2K) signal
- Built-in Histogram, Waveform, Vector Scope, Zebra
- Built-in Audio Level Meter up to 16ch
- Lissajous audio metering
- 3 Gamma Preset Modes
- Wide array of markers and indicators
- Two 3G-SDI & Dual Link inputs
- IMD (in monitor display)
- Optimized I-P conversion
- Supports the EIA/CEA-708 and EIA/CEA-608 SDI closed captioning standards
- Color Temperature settings (9,300K, 6,500K, 5,600K or User mode)
- IP modes: Normal, Field, and Cinema (24p)
- Pixel-by-pixel (1:1) display
- Time code display (SDI)
- Built-in stereo speaker
- Tiltable stand with 2-way installation capability
- Carrying handle
Why not buy this JVC DT-V17G2Z 16.5-Inch Multi-Format Broadcast Field/Studio LCD Production Monitor today?
JVC DT-V17G2Z 16.5-Inch Multi-Format Broadcast Field/Studio LCD Production Monitor Specifications:
- Monitor
- Type: Multi-format LCD monitor
- Screen Size: 17 inches, measured diagonally (Visible: 16.5 inches/42cm)
- Aspect Ratio: 16:9
- LCD Panel: 17" diagonal, active matrix TFT
- Effective Screen Size (W x H): 365.8 x 205.7 mm (14-7/16" x 8-1/8")
- Pixels: 1920 x 1080
- Display Colors: 16.77 million
- Viewing Angle: 178° / 178°
- Brightness (typ.): 300 cd/m2
- Contrast Ratio (typ.) 1500:1
- Applicable Standard: 3G SDI : SMPTE424M/SMPTE425M; DUAL LINK HD SDI : SMPTE372M; HD SDI: BTA S-004C, SMPTE292M; SD SDI: ITU-R BT.656: 525/625, SMPTE259M: 525; EMBEDDED AUDIO: SMPTE299M, SMPTE272M
- Audio Output Internal: 1.0 W + 1.0 W (L/R)
- Environmental Conditions: Operating temp - 5°C to 35°C (41°F to 95°F) / Operating humidity - 20% to 80% (non condensing) / Storange -20°C to 60°C
- Energy Efficiency Class: D
- Power Requirements: AC: 120 V/220 V - 240 V, 50/60 Hz; DC: 12 V - 17 V
- Rated Current: 0.47 A
- Power Consumption: On-mode: 29 W; Stand-by mode: 0.3 W; Annual Energy Consumption: 43 kWh/year
- Input/Output Connectors
- 3G/HD/SD/SDI (Out 2: SWITCHED OUT) - Digital signal input (compatible with EMBEDDED AUDIO signals): 1 line switched out, BNC connector x 1
- 3G/HD/SD SDI (Out 1) - Digital signal input (compatible with EMBEDDED AUDIO signals): 1 line, BNC connector x 1
- 3G/HD/SD SDI (In 1) / 3G/HD/SD SDI (In 2) - Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals): Auto detection, 2 lines BNC connector x 2
- Component (Y, PB/B-Y, PR/R-Y): IN: 1Line; BNC connector x 3, Y: 1 V (p-p), 75 ohms (with sync), PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 ohms
- HDMI IN: x1 (Compatible with HDCP)
- VIDEO: Composite video signal input/output: 1 line, BNC x 2, 1 V (p-p), 75 ohms, (IN and OUT are connected with a bridge connection. Auto termination)
- Audio: Audio Asign (In 1) Audio Asign (In 2) Analog audio signal input: 2 lines, RCA connector x 2, 35 mm diam. stereo mini jack x 1, 500 mV (rms), high impedance
- Audio Assign (Monitor Out): Analog audio signal output: 1 line, RCA x 2, 500 mV (rms)
- Make/Trigger: RJ-45 (8-pin)
- RS-485: RJ-45 x 2 (IN/OUT, 8-pin)
- RS-232C: D-sub (9-pin)
- Physical
- Dimensions (WxHxD): With stand - 16-15/16" x 13-13/16" x 8-7/16 / Without stand - 16-15/16" x 12-3/16" x 4-1/16"
- Weight: With stand - (18.1 lbs) / without stand - (12.8 lbs)
