This JVC DT-U31U 31.5-Inch UHD 3840x2160 HDR Multi-Interface Studio Monitor monitor supports 12G/6G/3G-SDI input, 4x 3G-SDI quad link input (Both square division and Interleave), 4K60p HDMI 2.0 input, and by optional plug-in SFP adaptor, the DT-U monitors support additional SFP and video over IP SMPTE-2022 input.

4 independent SDI quadview mode: You can also input 4x independent SDI sources to quadview; support different formats SDI mixed input (require the same frequency rate)

3DLUT auto color calibration: DT-U series monitors support 3DLUT 17x17x17 precise auto calibration, with built-in color generator and calibration software. They currently support X-rite i1 Display (special version) and will support JETI Specbos 1211 (near-future update). Probes directly pluged into monitor USB port to auto calibrate. The calibration process time is as short as 30 minutes

Built-in De-log LUTs: DT-U series monitors have built-in De-log LUTs including JVC J-log1, ARRI Log-C, SONY S-log2, S-log3, Canon C-log, Panasonic V-log and RedLogFilm LUTs, to convert to ITU-Rec.709 directly.

User 3DLUT upload: DT-U series monitors support user 3DLUT cube files to upload by USB, which is convenient for color creation during post-production monitoring.

Waveform/Vector/Histogram: Support waveform selection display (Y, Cb, Cr, R, G, B), and single lines selection mode; support vector scope and R/G/B/Y histogram display, with multiple display position, size and color selection.

16-channel audio meters with alert and output selection: Support de-embed audio from SDI and HDMI, and display 16-ch audio level meters, with audio abnormal alerts info displayed on each audio bar. You can also select any 2 channels audio to output via 3.5mm socket or speakers. The audio meter pattern position can be selected from one of four corners, and you can select to display only 2 channels, 8 channels, and full 16 channels. Also scale markers, alert info, and translucent of the audio meter pattern are selectable.

HLG and PQ Capability: DT-U series monitors support HLG HDR and ST.2084 PQ HDR display to present realistic image.

Low latency mode: Support Low latency mode (less than half frame) under 4K input sources, the special image processing mode for lip-sync monitoring.

Webserver IP remote control: Connect the monitor in LAN and read the monitor status or set menu by computer web browser, which enables studio administrators to control all the monitors remotely.

JVC DT-U31U 31.5-Inch UHD 3840x2160 HDR Multi-Interface Studio Monitor Features:

• Native 4K panel (3840 x 2160) with LED backlight
• Multiple 4K interfaces including 12G-SDI, 4x 3G-SDI, HDMI 2.0, Video over IP
• HLG-HDR & PQ-HDR Capability
• Built-in 3D LUT auto calibration
• Remote control via web browser
• Gamma preset selection: 1.8, 2.2, 2.4 and 2.6.
• TSL 3.1 and 4.0 UMD support
• On-screen TALLY display
• SDI Timecode (LTC, VITC1&2) display
• AFD (Active Format Description) info display
• Frame/Field view selection
• R/G/B/Mono, False color, Zebra stripes display
• Focus assist display mode
• H/V delay, freeze frame display mode
• Safety area selection: 80%, 85%, 90%, 93%, 95%
• Scale marker: 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1
• Native scan, over scan and normal scan selection
• GPI control via RS485 port connection
• USB firmware upgrade

Why not buy this JVC DT-U31U 31.5-Inch UHD 3840x2160 HDR Multi-Interface Studio Monitor today?