This Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1 allows you to transmit or receive audio on a Just Add Power system. As a receiver extract audio from your transmitters in another rack or a distant wall plate. As a transmitter encode analog audio to be decoded by a distant receiver.
An ethernet loop out is included allowing you to provide additional video to more J+P receivers or basic internet to a networking device.
Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1 Features:
- Stereo audio
- Input or Output based on jumper position
- Transmitter Mode --> Audio Input
- Receiver Mode --> Audio Output
- 192 kHz and 24-bit audio supported
- Volume adjustment
- RS232 control
- IR control
- Power Over Ethernet
NOTE: Please excuse us for not showing the price of this Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1as Just Add Power prohibits its Authorized Dealers, as we are, from showing their prices online. If you do see a price advertised that vendor is not authorized by Just Add Power to sell their products & Just Add Powers 3-Year Warranty will not be honored. Click the above link or call us right now & mention you read this to get our lowest price quote.
Why not buy this Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1 today?
Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1 Specifications:
CONNECTIONS | |
---|---|
Ethernet | (1) Gigabit Input |
Power | 802.af POE. Optional 4.7-23 volt input |
RS232 | (1) RS232 3.5mm Plugs (Null-Model/Straight Through Jumper on bottom of board) |
Analog Audio | (1) 3.5mm – capable of 2 channel PCM |
Audio Switch | Jumper on bottom sets to input or output mode |
INSTALLATION | |
Size | 5.0″ W x 4.9″ D x 1.2″ H |
AUDIO SPECS | |
Audio Capabilities | 2-channel audio 192kHz/24-bit |
ADDITIONAL SPECS | |
RS232 | Drivers are available to turn this RS232 into an extension of your control systems |
Why not buy this Just Add Power VBS-HDIP-ST1 Audio Transceiver ST1 today?
Just Add Power 2G Planning Guide
Just Add Power 2G Device Troubleshooting
Just Add Power Platform Differences