Intelix INT-IPEX1002 HDMI over IP Decoder - MJPEG
extenders are designed to distribute an HDMI formatted video signal from a single source to multiple displays, such as a digital signage environment. These extenders use parts of the link layer and network layer of the OSI model to distribute the video signal.
The INT-IPEX1002 receives the multicast packet stream on the LAN input and decodes the M-JPEG video back to an HDMI formatted video stream.
While the INT-IPEX1000 series extenders use Ethernet switches to distribute a video signal to multiple displays, these devices must be installed on their own dedicated network infrastructure.
Intelix INT-IPEX1002 HDMI over IP Decoder - MJPEG Features:
- Point-to-point and point-to-multipoint (250 Decoders)
- PoE PD (powered by switch) or local power (not included)
- MJPEG compression with stereo audio
- 100 m (328 ft) range per junction
- Compatible with Ethernet switches
- Uses any Cat5/5e/6/6A twisted pair cabling
- Ideal for digital signage and commercial video systems
- Repurpose IT infrastructure for AV distribution
Why not buy this Intelix INT-IPEX1002 HDMI over IP Decoder - MJPEG today?
Intelix INT-IPEX1002 HDMI over IP Decoder - MJPEG Specification:
- Input/Output Connections
- LAN port: One (1) 8P8C-F
- HDMI Input (INT-IPEX1001): One (1) HDMI Type A Receptacle
- HDMI Output (INT-IPEX1002): One (1) HDMI Type A Receptacle
- 5vDC Input: One (1) Threaded Locking Barrel (5.5 mm OD; 2.6 mm ID)
- Supported Audio and Video
- Maximum Video Compatibility: 24 Bit at 1080p
- Video Compliance: HDMI 1.3 and HDCP 1.3
- Embedded Audio: PCM 2-channel, 44.1 and 48 KHz
- Ethernet Signal Characteristics
- Maximum Distance: 100m
- Cable Requirements: Solid core Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern
- Ethernet Standards: IEEE 802.3/802.3u/802.3x/802.1p/802.1q
- PoE Standards: IEEE 802.3af/at (Type 1)
- Transcoder Compression: Motion JPEG
- Transmission Method: Multicast streaming on Link and Network layers of OSI model
- Chassis and Environmental
- Enclosure Material: Galvanized Steel
- Enclosure Dimensions (H x W x D): 21.5 mm x 120 mm x 60 mm (0.85 in x 4.72 in x 2.36 in)
- Shipping Weight: 0.18 kg (0.40 lbs)
- Operating Temperature: 0˚ to +55˚ C (+32˚ to +131˚ F)
- Operating Humidity: 10% to 90%, Non-condensing
- Storage Temperature: -40˚ to +85˚ C (-40˚ to +185˚ F)
- Storage Humidity: 10% to 85%, Non-condensing
- Power and Regulatory
- Power Consumption (INT-IPEX1001): 4.2 watts
- Power Consumption (INT-IPEX1002): 3.5 watts
- ESD Protection: ±15 kV
- Product Regulatory: CE, FCC, RoHS
- Other
- Warranty: 2 years
- Diagnostic Indicators: Power, Link, Data
- Power Supply (sold separately): PS-5D-10
- Included Accessories: Installation Guide, Rubber feet (4 ea), Mounting brackets (2 ea) with screws