HDTV Supplys WolfPack HDMI Wallplate Receiver Over HDBaseT is an HDBaseT Wallplate Receiver that has one HDMI input and one HDBaseT (RJ45) output. The resolution can go up to 4K@30Hz with a POC (Power Over Cable) function that a user can power on the HDBaseT receiver. For the transmission distance it can up to 220 feet at 1080P and for 4K/30Hz up to 110 feet. It can be used in small meeting rooms, classrooms, bars and restaurants or other long distance transmission applications.
HDTV Supplys implementation of the HDBaseT technology adds virtually zero latency to the HDMI audio & video signal, less than 7 microseconds (0.000007 sec) over 220 feet of CATx cable. At 100 feet you are talking about 3 microseconds (0.000003 sec). This means for example, in a church or auditorium, the speakers lips are always in synch with the video image on all the TVs & projectors 100's of feet away.
NOTE: This HDMI Wallplate Receiver Over HDBaseT is a Receiver (RX) only and requires an HDBaseT sending device like our WolfPack HDBaseT Modular HDMI matrix card that have an HDBaseT output and conforms to the specs of the transmitter.
HDMI Wallplate Receiver Over HDBaseT Features:
- Supports 1080p and up to 4K30
- Supports HDCP1.4
- Transmission distance: 70m at 1080P, 35m at 4K30 via CAT6/Cat6
- Supports POC (Power Over Cable) function
- Support one HDMI input
- LED working indicator
- Single gang width
Why not buy our HDMI Wallplate Receiver Over HDBaseT today?
HDMI Wallplate Receiver Over HDBaseT Specification:
- Model: HDBaseT-Wallplate
- Product: Name HDMI Wallplate Receiver Over HDBaseT
- Input: 1 - HDMI
- Output: 1 - HDBaseT(RJ45)
- Transmission distance: 70m at 1080P, 35m at 4K30 via CAT6/Cat6
- Bandwidth: 10.2Gbps
- Power Supply: DC 24V 1.25A
- Dimension (WxHxD): 115x70x28mm
- Weight: 40g
- Operating Temperature: -10藲C to 40藲C
- Storage Temperature: -25藲C to 55藲C
Why not buy our HDMI Wallplate Receiver Over HDBaseT today?
Operation - For All Available Cards DIP Switcher
Operation - POC DIP Switch on the HDBaseT Card
Operation - Tips for the HDbaseT products POC Function Set Up Steps
Comparison between HDBaseT Wallplate Transmitters
Operation Tips for HDbaseT Products with POC - Set Up Steps
HDMI Wallplate Transmitter Over HDBaseT User Manual
DO NOT USE EZ45 CAT6 CONNECTORS WITH HDBaseT PRODUCTS
Why not buy our HDMI Wallplate Receiver Over HDBaseT today?
DirecTV Controller
A: Check the LED indicator status to make sure all connections are good and stable.
Q: How is HDBaseT technology different from others?
A: Unlike other HD distribution technologies, HDBaseT is the only technology which enables CAT6/6/7 connectivity from 70 meters to 100 meters, depending upon the specific product, for uncompressed full HD multimedia content and up to 100 watts of charging power via a single cable. HDBaseT is optimized for video applications and can connect all HDBaseT enabled home entertainment devices. Also, HDBaseT technology has the capacity to deliver double the resolution available today to future 2K and 4K formats. Other existing solutions also require a specific cable and/or a new proprietary connector while HDBaseT utilizes the existing Ethernet infrastructure.
HDMI HDbaseT Extender Helpful Tips & Recommendations:
- Keep cables away from any equipment with an electromagnetic wave, e.g., mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power lines, etc.
- CAT6/6 cables should not exceed 220 feet or (70m).
- Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
- Shielded CAT6/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).
