HDTV Supply's WolfPack™ 4K HDMI Transmitter Over HDBaseT uses the latest HDBaseT technology which featuring no compression, no losses and no latency over an HDMI signal transmission via single UTP or STP CAT6/7 cables. The HDMI Transmitter Over HDBaseT can can work with other HDBaseT equipment such as Sonys HDBaseT projector, and others. Our HDMI Transmitter Over HDBaseT are transmitted by one single CAT6/ CAT6/ CAT7 cable and for 1080p it can transmit to a distance of 100m (330 feet) and for 4K60Hz (4:2:0) it can up to 70m (330 feet). The HDMI Transmitter Over HDBaseT is compatible with all the HDTV resolutions because it supports the HDCP2.2 protocol. The HDMI Transmitter Over HDBaseT Power Over Cable (POC) allowing users to power only one side, either the TX or the RX, if the receiving HDBaseT device supports POC.
Using this HDMI Transmitter Over HDBaseT with UTP cables allow you to run uncompressed 1080p high-definition HDMI signals upwards to 330 feet.
NOTE: This HDMI Transmitter Over HDBaseT is a Transmitter (TX) only and requires an HDBaseT receiving device like our WolfPack HDBaseT Modular HDMI matrix card or displays or projectors that have an HDBaseT input and conform to the specs of the transmitter.
What sets this HDMI Transmitter Over HDBaseT apart from others:
- Supports both 4K 30 and 4K 60
- Includes mounting clips
- Secure screw-on AC adapter
- Works with CAT6, but CAT6 preferred
HDMI Extender over HDBaseT Features:
- Transmits the highest quality audio and video:
- 1080p (4:4:4) up to 330 feet with CAT6/7/6a/7 cable
- 4K 60 (4:2:0) up to 330 feet with CAT6/6a/7 cable
- 4K 30 (4:4:4) up to 330 feet with CAT6/6a/7 cable
- Supports 720p and 1080i also
- HDR & Dolby Vision support only at 10.2 GBPS
- Supports FULL HD, UHD and 3D at 4K60Hz
- HDCP 2.2 & HDMI 2.0 Compliance
- Supports 7.1 DTS Master HD & Dolby True HD
- LED indicators
- EDID pass-though
- Supports the DDC2B protocol
- 36-bit Deep Color
- x.v.Color
- Supports 3D
- Comes with mounting clips
- Supports CEC (Consumer Electronic Control) compatible devices
Why not buy our HDMI Transmitter Over HDBaseT today?
HBDTHD100T-LITE Features:
- Input: 1 - HDMI, 1 - IR-TX, 1 - IR-RX and 1 - HDBaseT
- Output: 1 - RJ45
- Protocol: Supports HDMI 2.0 and compatible with HDCP 2.2
- Supported Resolution:
- 1920x1200,
- 1680x1050,
- 1360x768,
- 1280x800,
- 1920x1080,
- 1600x900,
- 1366x768,
- 1280x720,
- 1024x576,
- 1920x1200,
- 1680x1050,
- 1360x768,
- 1280x800,
- 4096x2160@30Hz,
- 3840x2160@30Hz,
- 3840x2160@60Hz
- Color Space: 1080p: 36Bit Deep Color and 4K: 24Bit True Color, 4:2:0
- Bandwidth: 10.2Gbps
- Supported Transmission Distances: CAT6/7 cable: 330FT / 100m (1080p60Hz) and 330 FT/35m(4K60Hz)
- Dimension: 115*84*16（mm）
- Weight: 120g
- Power AC: 100-240V 50/60Hz 1.5A Max DC: 12V 1500mA
- Consumption: ≤11W
- Working Humidity: 10%-90%
- Working Temperature: 0℃-50℃
- Storage Temperature: -20℃-75℃
HDMI Extender over HDBaseT Package Contents:
- 1 - HDBaseT Transmitter (TX)
- 1 - User Manual
- 1 - Power adapter for HDBaseT with POC
Why not buy our HDMI Transmitter Over HDBaseT today?
Operation - EDID Setup for the 4K30 (HDMI & HDBaseT) Input Card
Operation - For All Available Cards DIP Switcher
Operation - POC DIP Switch on the HDBaseT Card
Operation - Tips for the HDbaseT products POC Function Set Up Steps
Operation Tips for HDbaseT Products with POC - Set Up Steps
Specifications For All Modular Matrices Single Port Cards
Comparison Spreadsheet For All Modular Matrices Single Port Cards
CAT6 Installation Tips (Don't Use Patch Panels)
Why not buy our HDMI Transmitter Over HDBaseT today?
DirecTV Controller
A: Check the LED indicator status to make sure all connections are good and stable.
Q: This HDMI HDBaseT Extender has CEC, what is CEC?
A: This HDMI HDBaseT Extender features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.
Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.
Q: How is HDBaseT technology different than others?
A: Unlike other HD distribution technologies, HDBaseT is the only technology which enables CAT6/6/7 connectivity from 70 meters to 100 meters, depending upon the specific product, for uncompressed full HD multimedia content and up to 100 watts of charging power via a single cable. HDBaseT is optimized for video applications and can connect all HDBaseT enabled home entertainment devices. Also, HDBaseT technology has the capacity to deliver double the resolution available today to future 2K and 4K formats. Other existing solutions also require a specific cable and/or a new proprietary connector while HDBaseT utilizes the existing Ethernet infrastructure.
HDMI HDbaseT Extender Helpful Tips & Recommendations:
- Keep cables away from any equipment with an electromagnetic wave, e.g., mobile phone, microwave, radio equipment, fluorescent lamp, high voltage power lines, etc.
- CAT6/6 cables should not exceed 330 feet or (70m).
- Please adhere to the TIA/EIA568B standards when terminating network cables in the field.
- Shielded CAT6/6 with metal RJ-45 connectors are recommended to safeguard against random video flashes caused by electromagnetic interference (EMI).
