Constructed with a durable aluminum design with wall mountable cut outs for easy installation in any application, the HDMI extender features Full HD support and support for uncompressed audio outputs (LPCM, Dolby TrueHD, DTS Master Audio). IR control also allows you to easily control your source devices, such as Blu-ray players, television receivers, and other HDMI enabled devices.
HDMI to CAT6 Cable Features:
- Extends HDMI and IR over a single Cat6 cable
- 1080p at up to 175 ft using Cat6
- Supports AV signal uncompressed & lossless transmission
- Supports all HDMI features including full HD 1080p deep color, lip sync, CEC and all high resolution multi-channel audio format, including Dolby digital plus, 7.1 LPCM, Dolby TrueHD and DTS Master Audio
- 2 x 5V DC power adapters included
- Resolution: 480i/480p, 576i/576p, 720p, 1080i/1080p
- HDCP compliant
- Control devices via IR signal
- Easy to use
- Plug and Play, no drivers needed
- Aluminum housing for durability
- Includes sender unit, receiver, 2 x AC adapters, 1 x TX IR cable, 1 x RX IR cable
- Power Consumption: 2W (max) each
- Supports all 2D and 3D HDMI 1.4a compliant devices as well as with older 1.0, 1.1, 1.2 and 1.3 versions
- Supports both HDMI audio and HDMI video
- remote IR to manage connected devices remotely (see below picture).
- ROHS compliant
- Supports 720p, 1080i, 1080p @ 60Hz for up to 175 feet with CAT6
- Video Bandwidth: 225 Mhz
- Connectors: Standard HDMI 19 pin, RJ45 (CAT6/6)
- 36-bit deep color support
- The audio portion supports the following audio standards:
- Dolby Digital
- Dolby Digital Plus
- Dolby TrueHD
- DTS
- DTS-HD
- Right and left stereo
- LPCM and PCM
- MPEG
- SACD
- and all HDMI audio standards
- HDCP 1.1/ DDC Compliant
- Universal Power Supply: 5v 1A DC on both units unit
- Includes transmitter & receiver and 2 - power adapters.
- One year warranty
The HDMI to CAT6 Cable set comes with one transmitter, one receiver, and one AC adapter that is used with the receiver. The device requires only one CAT6 or CAT6 cable. This HDMI to CAT6 / CAT6 Extender supports a 2.25 GHz bandwidth, and automatic skew compensation adjustments for variations in CAT6 or CAT6 cables. The transmitter and receiver comes with an AC power adapter to provide low voltage power for the device.
Why not buy this HDMI to CAT6 Cable today
HDMI to CAT6 Cable Features:
- Power Supply: DC5V, 1A
- Resolution Supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
- Network Cable Cat6
- Transmission Length Cat6: 175 ft
- IR Supports 20-60Khz
- Power Consumption TX: <2W; RX: <2W
HDMI to CAT6 Cable Contents:
- HDMI Receiver 1pc
- HDMI Sender 1pc
- Power Adapter 2pc
- IR Receiver 1pc
- IR Sender 1pc
- User Manual 1pc
This HDMI to CAT6 Cable can be used with:
- Any high definition Dish Network and DirecTV receiver with HDMI outputs
- High definition TiVo's with HDMI outputs
- Any high definition cable receiver with HDMI outputs
- Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
- Any "Over The Air" (OTA) high definition receiver with HDMI outputs
- Sony PS3, HD DVD and Blu-ray DVD players
- Any Xbox360 with HDMI outputs
- Any upconverting DVD player with HDMI outputs
- Any DVHS VCR with HDMI outputs
- An APPLE TV with HDMI outputs
- An Roku with HDMI outputs
- An VuduTV with HDMI outputs
- Many PC video cards with HDMI outputs
- Any high definition camcorder with an optional type C to standard HDMI cable
- Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
- Any HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
- and other similar devices.
A: When it flashes it has no signal transmission and it stays solid when there is a signal.
Q: Can I use this HDMI extender to patch through a patch panel & wall plates to connect to a remote TV?
A: No. The CAT6/7 connection between the HDMI Transmitter and Receiver has to be a single, home run, point-to-point patch cable with CAT6 solid being the best cable for new installations. CAT6 will also work well. Patching through patch panels, couplers, wall jacks and poor conductor patch cables create multiple points of signal attenuation (loss), causing the HDMI signal to degrade to the point where the Receiver may not recognize it.
Q: This HDMI to CAT6 Cable has CEC, what is CEC?
A: This HDMI to CAT6 Cable features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.
Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.
