Part of HDTV Supply popular WolfPack family of products the WolfPack HDMI over CAT6 Extender allows up to 1080p HDMI video & audio to be wired up to ~700 feet using only one low cost CAT6 cable or ~500 feet using only one CAT6 cable. It comes with both a transmitter and a receiver, 1-AC adapter (as it has POE) and has 38-KHz bidirectional IR to control a source device as well as the TV. It also supports Point-to-Point and Point-to-Many. (See below for distances with different types of cables).

It supports resolutions up to 1080P@60Hz when wired with an Ethernet switch to distribute & extend HDMI signal long distances with a very low bandwidth consumption (10Mbps/RX) minimizing the impact to Internet surfing. H.264 technology provides vivid high-definition output image quality.

The HDMI over CAT6 Extender includes two boxes - one HDMI transmitter (TX) & one HDMI receiver (RX). The transmitter connects to a HDMI source with an HDMI cable. The HDMI receiver connects to a display in the same way. Between the two modules, one low cost CAT6 or 6 cable is used to send the HDMI video & audio signal as well as the IR signal. The HDMI Loopout sends the HDMI signal from the TX to local TV.

For optimal video performance use our WolfPack HDMI 2.0b and HDCP 2.2 cables with this product.

WolfPack HDMI over CAT6 Extender Features:

WolfPack Transmission Distance Tests with Different CATx cables:


• 1080p to ~725 feet over a single solid UTP CAT7 cable
• 1080p to ~700 feet over a single solid UTP CAT6 cable
• 1080p to ~600 feet over a single solid UTP CAT6 cable
• 1080p to ~475 feet over a single solid UTP CAT6 cable
• 1080p to ~660 feet over a single stranded UTP CAT6 cable
• 1080p to ~500 feet over a single stranded UTP CAT6 cable
• 1080p to ~400 feet over a single stranded UTP CAT6 cable


• Latency: 200 ms
• Compression type: H.264
• HDMI 1.3 version
• HDCP 1.2 version
• Supports video resolutions up to 1080p @ 60Hz
• Supports POE power function allowing the power adapter to connect to either the TX or RX
• Supports IR signal transmission
• High compatibility as it can auto-match the source and display device
• Built-in automatic adjustment system makes the image smooth, clear and stable
• Built-in ESD protection system
• Simple to install - plug and play
• Built-in automatic adjustment system makes the image smooth, clear and stable
• Built-in ESD protection system
• 660 feet with a CAT6 cable over H.264 technology
• Full HD support: 1080p@60Hz
• Extends HDMI signals distances of up to 660M using one CAT6/7 Cables (not included)
• Can be used with mixed devices e.g. an HDMI DVD player and an HDCP enabled DVI-D display
• Long distance HDMI signal transmission using CAT6 or CAT6 cable
• Cost effective solution minimizes the use of an expensive HDMI cable versus an expensive fiber cable
• Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
• Supports High Definition audio, Dolby Digital True HD and DTS-HD
• Pure hardware solution, no software required
• Easy to install and use
• 1 year warranty

Features 38-Khz Bi-Directional IR: Over the same CAT6/7 cable you can send commands from a control system to the TV as well as simultaneously control DVD players, cable boxes and other source equipment from the TV location. The IR works in only stand alone applications with one source and one TV. The supplied AC adapter may need to be put on the Receiver, not the Transmitter, if you are using the IR function and some remote controls.

NOTE: We recommend strongly that you use good CAT6 / 6 cables with any CAT6 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap or poorly made cables. Since it is high definition video we only recommend CAT6/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. We also recommend, if possible, pre-made cables that are factory tested vs. field made cables due to the advanced testing methods used.

Why not this WolfPack HDMI over CAT6 Extender set today?