This Gefen EXT-HD2IRS-LAN-TX HDMI over IP with RS-232 and Bi-Directional IR - Sender Package can be automatically or manually configured to unique IP addresses to allow the connection of multiple Senders and Receivers to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network including the Gefen KVM over LAN products with HDMI, DVI, or VGA video, to create a virtual crosspoint matrix of just over 65,000 Sender and Receiver units total, depending on the network bandwidth and number of ports on the network switch (see Notes 1 and 2).
IR control can be extended from Sender to Receiver and from Receiver to Sender, allowing the control of source units and displays remotely. The IR input ports on Sender and Receiver units can accommodate both the Gefen powered IR extender EXT-RMT-EXTIRN and electrical IR from automation control devices. RS-232 serial control can also be extended between each Sender and Receiver unit.
Gefen EXT-HD2IRS-LAN-TX HDMI over IP with RS-232 and Bi-Directional IR - Sender Package Features:
- Extends HDMI, RS-232, and bi-directional IR over IP, using a Gigabit Local Network
- Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
- Supported HDMI Features:
- HDCP
- Deep Color
- LPCM 7.1 audio, Dolby? TrueHD, and DTS-HD Master Audio
- Lip-Sync pass-through
- Built-in web interface facilitates intuitive set up and operation
- Any of the Senders within a network can be accessed by any Receiver unit via a web browser on a mobile device or computer, or by using the Gefen KVM/Video over IP Keyboard Switching
- Controller software (available for download at www.gefen.com)
- Supports a total of just over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
- Mode Selector function in web interface for sharpness or motion optimization of image
- Versatile IR In/Ext ports work with powered Gefen IR extenders and electrical IR from automation control devices
- Field-upgradable firmware via web server interface
- Locking power supply connectors
Why not buy this Gefen EXT-HD2IRS-LAN-TX HDMI over IP with RS-232 and Bi-Directional IR - Sender Package today?
Gefen EXT-HD2IRS-LAN-TX HDMI over IP with RS-232 and Bi-Directional IR - Sender Package Specifications:
- Maximum Pixel Clock: 165 MHz
- Maximum TMDS Clock: 225 MHz
- Video Input Connector (Sender): (1) HDMI Type A 19-pin, female, locking
- Video Output Connector (Receiver): (1) HDMI Type A 19-pin, female, locking
- RS-232 ports (Sender/Receiver): (1) 3.5mm mini-stereo jack (DB-9 adaptors included)
- IR Emitter ports (Sender/Receiver): (1) 3.5mm mini-mono jack
- IR In/Extender ports (Sender/Receiver): (1) 3.5mm mini-stereo jack
- IR Extender: EXT-RMT-EXTIRN
- Ethernet connectors (Sender/Receiver): (1) RJ-45, shielded
- Reset buttons (Sender/Receiver): (1) tact-type, recessed
- Link Indicator (Sender/Receiver): (1) LED, amber
- Power Indicator (Sender/Receiver): (1) LED, green
- Power Supply (Sender / Receiver): 5V DC, locking
- Power Consumption (Sender): 6W maximum
- Power Consumption (Receiver): 4W maximum
- Operating Temperature: 0 to +50 ?C
- Operating Humidity: +10 to +90%, Relative Humidity, non-condensing
- Storage Temperature: -20 to +85 ?C
- Storage Humidity: 0 to +95%, Relative Humidity, non-condensing
- MTBF: 50000 hours
- Dimensions (Sender / Receiver) (W x H x D): 4.3" x 1" x 3.2" (110mm x 26mm x 80mm)
- Unit Weight:
Why not buy this Gefen EXT-HD2IRS-LAN-TX HDMI over IP with RS-232 and Bi-Directional IR - Sender Package today?
Gefen EXT-HD2IRS-LAN-TX User Manual
