This Gefen EXT-DVIKA-LANS-RX-UK DVI KVM over IP - Receiver Package - with Power Cord for UK territories providing high performance, scalable, expandable, and secure AV routing and distribution over a standard Gigabit Local Area Network. The Gen 2.0 KVM products offer enhanced performance, features, and functionality such as 4K Ultra HD with HDR support, built-in scalers, video-wall control, independent USB, RS-232, IR, and audio routing, and backward-compatibility with our first-generation products.
The EXT-DVIKA-LANS-TX & RX support VESA and CEA resolutions up to WUXGA (1920 x 1200 at 60 Hz) and 1080p Full HD (1920 x 1080 at 60 Hz).The Sender unit features a video output for local monitoring of the source. USB, RS-232 2-way IR, and audio can be routed independently** between any Sender and Receiver unit, allowing end-users to control any of the sources and the displays within their network. With this greatly expanded array of new cutting-edge features and performance, the new Gefen AV over IP products fully address the ever-growing needs of systems integrators.
The Receiver features a built-in scaler to help optimize the image for a variety of displays and different viewing environments.
Gefen EXT-DVIKA-LANS-RX-UK DVI KVM over IP - Receiver Package - with Power Cord for UK territories Features:
- Extends DVI, USB, RS-232, 2-way analog audio, and IR, using a Gigabit Local Area Network
- Independent video, USB, RS-232, IR, and audio routing
- Backward-compatible with first generation Gefen AV over IP products
- Supports VESA and CEA input and output resolutions up to WUXGA (1920 x 1200 at 60 Hz) and 1080p Full HD (1920 x 1080 at 60 Hz)
- DVI output on Sender unit for local monitoring of the source
- KM Emulation feature facilitates real-time, simultaneous Keyboard and Mouse control of each source from all connected workstations
- Integrated scaler ensures maximum compatibility and best possible viewing experience with different contents and displays
- Built-in video wall controller accommodates any number of rows and columns up to 16?16
- When used in HDMI mode, built-in Audio De-Embedder on Receiver breaks out 2 channel analog, 2 channel PCM, and up to 5.1 channels of Bitstream audio from the HDMI signal, allowing the audio content to be sent to external amplifiers and music distribution systems for added impact
- MFU (Mass-Firmware-Update), quick and automated configuration, and enhanced control capabilities and system security when used with the Gefen EXT-CU-LAN Matrix Controller
Why not buy this Gefen EXT-DVIKA-LANS-RX-UK DVI KVM over IP - Receiver Package - with Power Cord for UK territories today?
Gefen EXT-DVIKA-LANS-RX-UK DVI KVM over IP - Receiver Package - with Power Cord for UK territories Specifications:
- Video Input connector (Sender): (1) DVI 29-pin, female, digital only
- Video Output connector (Sender): (1) DVI 29-pin, female, digital only
- Video Output connector (Receiver): (1) DVI 29-pin, female, digital only
- Line Input (Sender): (1) 3.5mm mini-stereo jack
- Line Output (Sender): (1) 3.5mm mini-stereo jack
- Mic Input (Receiver): (1) 3.5mm mini-stereo jack
- Headphones/Line Output (Receiver): (1) 3.5mm mini-stereo jack
- Optical Digital Audio Output (Receiver): (1) TOSLINK?
- USB Host Interface port (Sender): (1) USB Type B, female
- USB Device ports (Receiver): (2) USB 2.0 Type A, female ,: (2) USB 1.1 Type A, female
- RS-232 port (Sender): (1) DB-9, female
- RS-232 port (Receiver): (1) DB-9, male
- IR Sensor (Receiver): (1) Located on front panel
- IR In/Ext (Sender/Receiver): (1) 3.5mm mini-stereo jack
- IR Out (Sender/Receiver): (1) 3.5mm mini-mono jack
- IR Extender type: EXT-RMT-EXTIRN
- Ethernet port (Sender): (1) RJ-45, shielded, PoE
- Ethernet ports (Receiver): (2) RJ-45, shielded, one with PoE
- Channel Up/USB-Request button (Receiver): (1) tact-type
- Channel Down button (Receiver): (1) tact-type
- Mode button (Sender): (1) tact-type, recessed
- Program button (Sender/Receiver) (1) tact-type, recessed
- Program Select switch (Sender/Receiver) (1) slide-type, recessed
- Link Indicator (Sender/Receiver) (1) LED, green
- Power Indicator (Sender/Receiver) (1) LED, blue
- Power Supply jack (Sender/Receiver) 5V DC, 2.5mm pin and 5.5mm barrel, locking
- Power Requirement (Sender/Receiver) 5V DC, or PoE (802.3af standard)
- Power Consumption Sender: TBD
- Receiver: TBD
- Operating Temperature (Sender/Receiver) +32 to +122?F (0 to +50?C)
- Operating Humidity (Sender/Receiver) 5% to 90% RH, non-condensing
- Storage Temperature (Sender/Receiver) -4 to +185?F (-20 to +85?C)
- Storage Humidity (Sender/Receiver) 0% to 95% RH, non-condensing
- MTBF Sender: 50000 hours
- Receiver:50000 hours
- Dimensions (W x H x D, without connectors or feet)Sender: 8.4" x 1.7" x 5.9" (214mm x 43mm x 150mm)
- Receiver: 8.4" x 1.0" x 5.9" (214mm x 25mm x 150mm)
- Unit Weight Sender: TBD
- Receiver TBD
- Shipping Weight Sender: TBD
- Receiver: TBD
- Features and specifications are subject to change without notice
- Pending features to be activated via an upcoming firmware update
Why not buy this Gefen EXT-DVIKA-LANS-RX-UK DVI KVM over IP - Receiver Package - with Power Cord for UK territories today?
Gefen EXT-DVIKA-LANS-RX-UK User Manual
Gefen EXT-DVIKA-LANS-RX-UK Datasheet
