This Dynacord L1800FD-US 2x950W DSP Power Amplifier is equipped with fully integrated professional speaker processing with FIR drive technology. The L1800FD has market leading acoustic performance with rock solid reliability. With true 2 ohm stability and intuitive system control, setup and control is easy.
Dynacord L1800FD-US 2x950W DSP Power Amplifier Features:
- 2 x 1400W at 2 Ohms
- 2 x 850W at 4 Ohms
- 2 x 450W at 8 Ohms
- SpeakOn Connectors
- Single, Dual Channel, and Bridged Modes
- Advanced DSP with FIR Drive Technology
- Powerful Control Software
- Advanced Protection Circuitry
- Includes Euroblock Connectors
- Live performance DSP amplifier, SpeakOn connectors
- Fully integrated professional speaker processing with FIR Drive technology
- Professional acoustic performance and rock-solid reliability
- Powerful and proven audio performance
- Engineered for constant stability at 2 Ohms
- Sophisticated protection circuitry always protects the amplifiers and connected loudspeakers
- High-performance bulletproof voltage handling
- On-board DSP includes multi-band PEQs, crossovers, limiters and delay per channel; True channel grouping control with extra DSP capabilities including GEQ
- Intuitive, powerful control software makes configuration and real time control easy. Up to 16 amp channels can be controlled and monitored simultaneously
- Advanced FIR drive to optimize loudspeaker settings, providing premium features into an installation form factor
- Engineered in Germany
Why not buy this Dynacord L1800FD-US 2x950W DSP Power Amplifier from HDTV Supply today?
Dynacord L1800FD-US 2x950W DSP Power Amplifier Specifications:
- Load Impedance: 2, 2.6, 4, 8 Ohms
- Maximum Output Power, SIngle Channel:
- 2 Ohms: 1600W
- 2.6 Ohms: 1300W
- 4 Ohms: 950W
- 8 Ohms: 480W
- Maximum Output Power, Dual Channel:
- 2 Ohms: 1400W
- 2.6 Ohms: 1200W
- 4 Ohms: 850W
- 8 Ohms: 450W
- Maximum Output Power, Bridged:
- 4 Ohms: 2800W
- 8 Ohms: 1700W
- Maximum RMS Voltage Swing, THD = 1%, 1kHz: 65.1V
- Voltage Gain ref.1kHz: 32.0dB
- IMD-SMPTE, 60 Hz, 7 kHz: < 0.1%
- DIM 30: < 0.05% (3.15 kHz, 15 kHz)
- Maximum Input Level: +21dBu
- Crosstalk: < -80dB (ref. 1 kHz, at 100 W/4 O)
- Frequency Response: 10 Hz to 21 kHz (±1 dB)
- Input Impedance, active balanced: 20kO
- Signal-to-Noise Ratio (A-weighted): >105dB
- Output Noise , A-weighted: < -68dBu
- Output Stage Topology: Class AB
- Power Requirement: 240 V, 230 V, 120 V or 100 V; 50Hz to 60 Hz (factory configured)
- Power Consumption: 700W (? Maximum Output Power @4O)
- Protection: Audio limiters, high temperature, DC, HF,Back-EMF, Peak current limiters, Inrush current limiters, Turn on delay
- Cooling: Front-to-rear, 3-stage-fans
- Safety Class: I
- Available Color: Black
- Dimensions (HxWxD): 3.46" x 19.02" x 18.2" (88 x 483x 462.4mm)
- Weight Net: 33.51lbs (15.2kg)
- Signal Processing: FIR Filters, Audio Limiters;Output delay per channel; 31 band GEQ per channel; PEQ per channel; Loadimpedance
- Mains Fuse: 240 V/230 V: T12AH; 120 V/100 V: T25AH
- Operating Temperature Range: +5°C to +40°C (40°F to+105°F)
- Total Harmonic Distortion: < 0.05% (600 W/4 O MBW =80 kHz, 1 kHz)
Why not buy this Dynacord L1800FD-US 2x950W DSP Power Amplifier from HDTV Supply today?
Dynacord L1800FD-US User Manual
